Forum Search:
Forum.Brain-Cluster.com: Brain Cluster Technical Forum
Ultimate forum for Technical Discussions

Home » Microsoft » Windows Server » Active Directory » Default Gateway and Proxy server
Default Gateway and Proxy server [message #157100] Tue, 30 June 2009 07:45 Go to next message
emaresea  is currently offline emaresea
Messages: 2
Registered: June 2009
Junior Member
I am managing a network with 2 gateways and a proxy server. Mostly using
static IP addresses

Gateway 1 is the main gateway and has port 80 blocked except for the proxy
server.

Gateway 2 has port 80 open.

Proxy server has no proxy set.

DCs are set to gateway 1 as default and domain level group policy has proxy
set for internet explorer

Unfortunately we have vehicle tracking software which uses port 80 but
cannot use a proxy server!!! To combat this the users of this softwre have
their gateway set to gateway 2 and the proxy taken off of internet explorer.

After any mdification to the AD especially Group Policies, and also at other
times, a refresh is forced at next login and every one goes back to the
default settings which stops the tracking from working.

Question How do I stop the automatic change of IP Gateway and the resetting
of the proxy use?
--
Martin
Re: Default Gateway and Proxy server [message #157101 is a reply to message #157100] Tue, 30 June 2009 07:50 Go to previous messageGo to next message
meiweb(nospam)  is currently offline meiweb(nospam)  Germany
Messages: 1307
Registered: July 2009
Senior Member
Hello emaresea,

If you need different settings for the tracking software create a new OU
and move them to it. Then create and link a new GPO with the needed settings
for them.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> I am managing a network with 2 gateways and a proxy server. Mostly
> using static IP addresses
>
> Gateway 1 is the main gateway and has port 80 blocked except for the
> proxy server.
>
> Gateway 2 has port 80 open.
>
> Proxy server has no proxy set.
>
> DCs are set to gateway 1 as default and domain level group policy has
> proxy set for internet explorer
>
> Unfortunately we have vehicle tracking software which uses port 80 but
> cannot use a proxy server!!! To combat this the users of this softwre
> have their gateway set to gateway 2 and the proxy taken off of
> internet explorer.
>
> After any mdification to the AD especially Group Policies, and also at
> other times, a refresh is forced at next login and every one goes back
> to the default settings which stops the tracking from working.
>
> Question How do I stop the automatic change of IP Gateway and the
> resetting of the proxy use?
>
Re: Default Gateway and Proxy server [message #157165 is a reply to message #157101] Wed, 01 July 2009 08:50 Go to previous messageGo to next message
emaresea  is currently offline emaresea
Messages: 2
Registered: June 2009
Junior Member
Hello Meinolf

Thanks for your information, that was what I thought I'd have to do, but I
cannot find (or work out) where in the GPO the requisite settings are.

I think that the Proxy seems to be able to be set on ,but not explicitly off
and the gateway I can't find at all!

--
Martin



"Meinolf Weber [MVP-DS]" wrote:

> Hello emaresea,
>
> If you need different settings for the tracking software create a new OU
> and move them to it. Then create and link a new GPO with the needed settings
> for them.
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>
> > I am managing a network with 2 gateways and a proxy server. Mostly
> > using static IP addresses
> >
> > Gateway 1 is the main gateway and has port 80 blocked except for the
> > proxy server.
> >
> > Gateway 2 has port 80 open.
> >
> > Proxy server has no proxy set.
> >
> > DCs are set to gateway 1 as default and domain level group policy has
> > proxy set for internet explorer
> >
> > Unfortunately we have vehicle tracking software which uses port 80 but
> > cannot use a proxy server!!! To combat this the users of this softwre
> > have their gateway set to gateway 2 and the proxy taken off of
> > internet explorer.
> >
> > After any mdification to the AD especially Group Policies, and also at
> > other times, a refresh is forced at next login and every one goes back
> > to the default settings which stops the tracking from working.
> >
> > Question How do I stop the automatic change of IP Gateway and the
> > resetting of the proxy use?
> >
>
>
>
Re: Default Gateway and Proxy server [message #157179 is a reply to message #157165] Wed, 01 July 2009 11:49 Go to previous message
meiweb(nospam)  is currently offline meiweb(nospam)  Germany
Messages: 1307
Registered: July 2009
Senior Member
Hello emaresea,

The gateway will be set as fixed ip address on the NIC or via DHCP. And the
proxy settings you find under the User configuration, WIndows settings, internet
explorer maintenance, connection settings, proxy settings.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> Hello Meinolf
>
> Thanks for your information, that was what I thought I'd have to do,
> but I cannot find (or work out) where in the GPO the requisite
> settings are.
>
> I think that the Proxy seems to be able to be set on ,but not
> explicitly off and the gateway I can't find at all!
>
> "Meinolf Weber [MVP-DS]" wrote:
>
>> Hello emaresea,
>>
>> If you need different settings for the tracking software create a new
>> OU and move them to it. Then create and link a new GPO with the
>> needed settings for them.
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers
>> no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> I am managing a network with 2 gateways and a proxy server. Mostly
>>> using static IP addresses
>>>
>>> Gateway 1 is the main gateway and has port 80 blocked except for the
>>> proxy server.
>>>
>>> Gateway 2 has port 80 open.
>>>
>>> Proxy server has no proxy set.
>>>
>>> DCs are set to gateway 1 as default and domain level group policy
>>> has proxy set for internet explorer
>>>
>>> Unfortunately we have vehicle tracking software which uses port 80
>>> but cannot use a proxy server!!! To combat this the users of this
>>> softwre have their gateway set to gateway 2 and the proxy taken off
>>> of internet explorer.
>>>
>>> After any mdification to the AD especially Group Policies, and also
>>> at other times, a refresh is forced at next login and every one goes
>>> back to the default settings which stops the tracking from working.
>>>
>>> Question How do I stop the automatic change of IP Gateway and the
>>> resetting of the proxy use?
>>>
Previous Topic:Sample Applications for AD LDS and AD FS
Next Topic:Audit AD DNS zone
Goto Forum:
  


Current Time: Fri Jan 19 00:45:06 MST 2018

Total time taken to generate the page: 0.02159 seconds
.:: Contact :: Home ::Sitemap::.

Powered by: FUDforum 3.0.0RC2.
Copyright ©2001-2009 FUDforum Bulletin Board Software