Forum Search:
Forum.Brain-Cluster.com: Brain Cluster Technical Forum
Ultimate forum for Technical Discussions

Home » Microsoft » Windows Server » Active Directory » GPO not applying properly
GPO not applying properly [message #157656] Fri, 10 July 2009 16:05 Go to next message
Mike  is currently offline Mike
Messages: 503
Registered: July 2009
Senior Member
I've created a Power Option GPO that turns the monitor off after 1 minute
just as a test to see if the GPO would work. I only pushed it to 3 computers
(XP of course!) and when I run RSOP on them, it shows that it applied on
those machines. But yet when I check the power options for the monitor to
turn off - it's still set to the default of 20 minutes.

I've checked event logs on both the client and DC's - there are no errors
being reported.

What do I do to get this to work?
RE: GPO not applying properly [message #157657 is a reply to message #157656] Fri, 10 July 2009 16:09 Go to previous messageGo to next message
Mike  is currently offline Mike
Messages: 503
Registered: July 2009
Senior Member
Sorry I did forget to include that I did set this up via Group Policy
Preferences.

"Mike" wrote:

> I've created a Power Option GPO that turns the monitor off after 1 minute
> just as a test to see if the GPO would work. I only pushed it to 3 computers
> (XP of course!) and when I run RSOP on them, it shows that it applied on
> those machines. But yet when I check the power options for the monitor to
> turn off - it's still set to the default of 20 minutes.
>
> I've checked event logs on both the client and DC's - there are no errors
> being reported.
>
> What do I do to get this to work?
Re: GPO not applying properly [message #157673 is a reply to message #157656] Sat, 11 July 2009 06:12 Go to previous messageGo to next message
meiweb(nospam)  is currently offline meiweb(nospam)  Germany
Messages: 1307
Registered: July 2009
Senior Member
Hello Mike,

Have you installed client side extensions on the XP machines?
CSE XP 32bit:
http://www.microsoft.com/downloads/details.aspx?FamilyID=e60 b5c8f-d7dc-4b27-a261-247ce3f6c4f8&displaylang=en

CSE XP 64bit:
http://www.microsoft.com/downloads/details.aspx?familyid=249 C1AED-C1F1-4A0B-872E-EF0A32170625&displaylang=en


Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> I've created a Power Option GPO that turns the monitor off after 1
> minute just as a test to see if the GPO would work. I only pushed it
> to 3 computers (XP of course!) and when I run RSOP on them, it shows
> that it applied on those machines. But yet when I check the power
> options for the monitor to turn off - it's still set to the default of
> 20 minutes.
>
> I've checked event logs on both the client and DC's - there are no
> errors being reported.
>
> What do I do to get this to work?
>
Re: GPO not applying properly [message #157739 is a reply to message #157673] Mon, 13 July 2009 17:21 Go to previous messageGo to next message
Mike  is currently offline Mike
Messages: 503
Registered: July 2009
Senior Member
Yes, those were deployed Enterprise wide.

Mike

"Meinolf Weber [MVP-DS]" wrote:

> Hello Mike,
>
> Have you installed client side extensions on the XP machines?
> CSE XP 32bit:
> http://www.microsoft.com/downloads/details.aspx?FamilyID=e60 b5c8f-d7dc-4b27-a261-247ce3f6c4f8&displaylang=en
>
> CSE XP 64bit:
> http://www.microsoft.com/downloads/details.aspx?familyid=249 C1AED-C1F1-4A0B-872E-EF0A32170625&displaylang=en
>
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>
> > I've created a Power Option GPO that turns the monitor off after 1
> > minute just as a test to see if the GPO would work. I only pushed it
> > to 3 computers (XP of course!) and when I run RSOP on them, it shows
> > that it applied on those machines. But yet when I check the power
> > options for the monitor to turn off - it's still set to the default of
> > 20 minutes.
> >
> > I've checked event logs on both the client and DC's - there are no
> > errors being reported.
> >
> > What do I do to get this to work?
> >
>
>
>
Re: GPO not applying properly [message #157741 is a reply to message #157739] Mon, 13 July 2009 17:52 Go to previous messageGo to next message
meiweb(nospam)  is currently offline meiweb(nospam)  Germany
Messages: 1307
Registered: July 2009
Senior Member
Hello Mike,

Just to be sure, there is no other GPO running that also configures some
settings?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> Yes, those were deployed Enterprise wide.
>
> Mike
>
> "Meinolf Weber [MVP-DS]" wrote:
>
>> Hello Mike,
>>
>> Have you installed client side extensions on the XP machines?
>>
>> CSE XP 32bit:
>>
>> http://www.microsoft.com/downloads/details.aspx?FamilyID=e60 b5c8f-d7d
>> c-4b27-a261-247ce3f6c4f8&displaylang=en
>>
>> CSE XP 64bit:
>> http://www.microsoft.com/downloads/details.aspx?familyid=249 C1AED-C1F
>> 1-4A0B-872E-EF0A32170625&displaylang=en
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers
>> no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> I've created a Power Option GPO that turns the monitor off after 1
>>> minute just as a test to see if the GPO would work. I only pushed
>>> it to 3 computers (XP of course!) and when I run RSOP on them, it
>>> shows that it applied on those machines. But yet when I check the
>>> power options for the monitor to turn off - it's still set to the
>>> default of 20 minutes.
>>>
>>> I've checked event logs on both the client and DC's - there are no
>>> errors being reported.
>>>
>>> What do I do to get this to work?
>>>
Re: GPO not applying properly [message #157742 is a reply to message #157741] Mon, 13 July 2009 18:03 Go to previous messageGo to next message
Mike  is currently offline Mike
Messages: 503
Registered: July 2009
Senior Member
No sir there is not. I've tried this in 2 different domains - get the same
results.

"Meinolf Weber [MVP-DS]" wrote:

> Hello Mike,
>
> Just to be sure, there is no other GPO running that also configures some
> settings?
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>
> > Yes, those were deployed Enterprise wide.
> >
> > Mike
> >
> > "Meinolf Weber [MVP-DS]" wrote:
> >
> >> Hello Mike,
> >>
> >> Have you installed client side extensions on the XP machines?
> >>
> >> CSE XP 32bit:
> >>
> >> http://www.microsoft.com/downloads/details.aspx?FamilyID=e60 b5c8f-d7d
> >> c-4b27-a261-247ce3f6c4f8&displaylang=en
> >>
> >> CSE XP 64bit:
> >> http://www.microsoft.com/downloads/details.aspx?familyid=249 C1AED-C1F
> >> 1-4A0B-872E-EF0A32170625&displaylang=en
> >> Best regards
> >>
> >> Meinolf Weber
> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
> >> confers
> >> no rights.
> >> ** Please do NOT email, only reply to Newsgroups
> >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> >>> I've created a Power Option GPO that turns the monitor off after 1
> >>> minute just as a test to see if the GPO would work. I only pushed
> >>> it to 3 computers (XP of course!) and when I run RSOP on them, it
> >>> shows that it applied on those machines. But yet when I check the
> >>> power options for the monitor to turn off - it's still set to the
> >>> default of 20 minutes.
> >>>
> >>> I've checked event logs on both the client and DC's - there are no
> >>> errors being reported.
> >>>
> >>> What do I do to get this to work?
> >>>
>
>
>
Re: GPO not applying properly [message #157743 is a reply to message #157742] Mon, 13 July 2009 18:37 Go to previous messageGo to next message
meiweb(nospam)  is currently offline meiweb(nospam)  Germany
Messages: 1307
Registered: July 2009
Senior Member
Hello Mike,

What "Action" did you define, create, update or replace? Did you configure
the new power scheme under computer or user configuration? If you choose
create, did you change the name, otherwise it wan't work?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> No sir there is not. I've tried this in 2 different domains - get the
> same results.
>
> "Meinolf Weber [MVP-DS]" wrote:
>
>> Hello Mike,
>>
>> Just to be sure, there is no other GPO running that also configures
>> some settings?
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers
>> no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> Yes, those were deployed Enterprise wide.
>>>
>>> Mike
>>>
>>> "Meinolf Weber [MVP-DS]" wrote:
>>>
>>>> Hello Mike,
>>>>
>>>> Have you installed client side extensions on the XP machines?
>>>>
>>>> CSE XP 32bit:
>>>>
>>>> http://www.microsoft.com/downloads/details.aspx?FamilyID=e60 b5c8f-d
>>>> 7d c-4b27-a261-247ce3f6c4f8&displaylang=en
>>>>
>>>> CSE XP 64bit:
>>>> http://www.microsoft.com/downloads/details.aspx?familyid=249 C1AED-C
>>>> 1F
>>>> 1-4A0B-872E-EF0A32170625&displaylang=en
>>>> Best regards
>>>> Meinolf Weber
>>>> Disclaimer: This posting is provided "AS IS" with no warranties,
>>>> and
>>>> confers
>>>> no rights.
>>>> ** Please do NOT email, only reply to Newsgroups
>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>>> I've created a Power Option GPO that turns the monitor off after 1
>>>>> minute just as a test to see if the GPO would work. I only pushed
>>>>> it to 3 computers (XP of course!) and when I run RSOP on them, it
>>>>> shows that it applied on those machines. But yet when I check the
>>>>> power options for the monitor to turn off - it's still set to the
>>>>> default of 20 minutes.
>>>>>
>>>>> I've checked event logs on both the client and DC's - there are no
>>>>> errors being reported.
>>>>>
>>>>> What do I do to get this to work?
>>>>>
Re: GPO not applying properly [message #157763 is a reply to message #157743] Tue, 14 July 2009 09:17 Go to previous messageGo to next message
Mike  is currently offline Mike
Messages: 503
Registered: July 2009
Senior Member
I choose 'Create' using the Desktop profile and made only 1 change (the
amount of minutes in which the montior would turn off).

When running RSOP on that pc - it shows that it is applied, but when you
look at the properties for the 'Turn off' it's still the default setting.



"Meinolf Weber [MVP-DS]" wrote:

> Hello Mike,
>
> What "Action" did you define, create, update or replace? Did you configure
> the new power scheme under computer or user configuration? If you choose
> create, did you change the name, otherwise it wan't work?
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>
> > No sir there is not. I've tried this in 2 different domains - get the
> > same results.
> >
> > "Meinolf Weber [MVP-DS]" wrote:
> >
> >> Hello Mike,
> >>
> >> Just to be sure, there is no other GPO running that also configures
> >> some settings?
> >>
> >> Best regards
> >>
> >> Meinolf Weber
> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
> >> confers
> >> no rights.
> >> ** Please do NOT email, only reply to Newsgroups
> >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> >>> Yes, those were deployed Enterprise wide.
> >>>
> >>> Mike
> >>>
> >>> "Meinolf Weber [MVP-DS]" wrote:
> >>>
> >>>> Hello Mike,
> >>>>
> >>>> Have you installed client side extensions on the XP machines?
> >>>>
> >>>> CSE XP 32bit:
> >>>>
> >>>> http://www.microsoft.com/downloads/details.aspx?FamilyID=e60 b5c8f-d
> >>>> 7d c-4b27-a261-247ce3f6c4f8&displaylang=en
> >>>>
> >>>> CSE XP 64bit:
> >>>> http://www.microsoft.com/downloads/details.aspx?familyid=249 C1AED-C
> >>>> 1F
> >>>> 1-4A0B-872E-EF0A32170625&displaylang=en
> >>>> Best regards
> >>>> Meinolf Weber
> >>>> Disclaimer: This posting is provided "AS IS" with no warranties,
> >>>> and
> >>>> confers
> >>>> no rights.
> >>>> ** Please do NOT email, only reply to Newsgroups
> >>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> >>>>> I've created a Power Option GPO that turns the monitor off after 1
> >>>>> minute just as a test to see if the GPO would work. I only pushed
> >>>>> it to 3 computers (XP of course!) and when I run RSOP on them, it
> >>>>> shows that it applied on those machines. But yet when I check the
> >>>>> power options for the monitor to turn off - it's still set to the
> >>>>> default of 20 minutes.
> >>>>>
> >>>>> I've checked event logs on both the client and DC's - there are no
> >>>>> errors being reported.
> >>>>>
> >>>>> What do I do to get this to work?
> >>>>>
>
>
>
Re: GPO not applying properly [message #157764 is a reply to message #157763] Tue, 14 July 2009 09:57 Go to previous messageGo to next message
aceman  is currently offline aceman  United States
Messages: 5816
Registered: July 2009
Senior Member
"Mike" <Mike@discussions.microsoft.com> wrote in message
news:A97BC280-B44E-4CB7-8212-07DD5FB24204@microsoft.com...
>I choose 'Create' using the Desktop profile and made only 1 change (the
> amount of minutes in which the montior would turn off).
>
> When running RSOP on that pc - it shows that it is applied, but when you
> look at the properties for the 'Turn off' it's still the default setting.

Mike,

It seems you may have missed something fundamental when setting up the
Preferences. Take a look at the following articles, notably the first one. I
hope it helps.

Ask the Directory Services Team : Managing Power with Group Policy ...Mar
21, 2008 ... (This is a three part article):
http://blogs.technet.com/askds/archive/2008/03/21/managing-p ower-with-group-policy-part-1-of-3.aspx
http://blogs.technet.com/askds/archive/2008/03/21/managing-p ower-with-group-policy-part-2-of-3.aspx
http://blogs.technet.com/askds/archive/2008/03/21/managing-p ower-with-group-policy-part-3-of-3.aspx

David Carlin: Power Settings via Group PolicyMay 18, 2005. Power Settings
via Group Policy. I wanted to create a policy to set all of the laptops in
the department to the same power scheme. ...
http://blog.case.edu/djc6/2005/05/18/power_settings_via_grou p_policy

Managing Power Settings in Windows XPAlthough you can't use Group Policy to
manage power settings in XP, ... if a Group Policy Object (GPO) isn't
supplied by default, you could create a custom ...
http://windowsitpro.com/article/articleid/93924/managing-pow er-settings-in-windows-xp.html



--
Ace

This posting is provided "AS-IS" with no warranties or guarantees and
confers no rights.

Please reply back to the newsgroup or forum to benefit from collaboration
among responding engineers, and to help others benefit from your resolution.

Ace Fekay, MCT, MCSE, MCSA 2003 & 2000, MCSA Messaging
Microsoft Certified Trainer
aceman@mvps.RemoveThisPart.org
http://twitter.com/acefekay

For urgent issues, you may want to contact Microsoft PSS directly. Please
check http://support.microsoft.com for regional support phone numbers.
Re: GPO not applying properly [message #157766 is a reply to message #157764] Tue, 14 July 2009 10:31 Go to previous messageGo to next message
Mike  is currently offline Mike
Messages: 503
Registered: July 2009
Senior Member
Ace - man you saved me a lot of heart ache - that 3rd link says it all:

"However, if, on the computer applying the preference item, a power scheme
with the same name exists, the preference item does nothing"

That's exactly what my problem was :)

I wish that this was a little more readily available - I never would have
found that blog or article.

Thank you sir - You get 1 million points for the solution! :)

"Ace Fekay [MCT]" wrote:

> "Mike" <Mike@discussions.microsoft.com> wrote in message
> news:A97BC280-B44E-4CB7-8212-07DD5FB24204@microsoft.com...
> >I choose 'Create' using the Desktop profile and made only 1 change (the
> > amount of minutes in which the montior would turn off).
> >
> > When running RSOP on that pc - it shows that it is applied, but when you
> > look at the properties for the 'Turn off' it's still the default setting.
>
> Mike,
>
> It seems you may have missed something fundamental when setting up the
> Preferences. Take a look at the following articles, notably the first one. I
> hope it helps.
>
> Ask the Directory Services Team : Managing Power with Group Policy ...Mar
> 21, 2008 ... (This is a three part article):
> http://blogs.technet.com/askds/archive/2008/03/21/managing-p ower-with-group-policy-part-1-of-3.aspx
> http://blogs.technet.com/askds/archive/2008/03/21/managing-p ower-with-group-policy-part-2-of-3.aspx
> http://blogs.technet.com/askds/archive/2008/03/21/managing-p ower-with-group-policy-part-3-of-3.aspx
>
> David Carlin: Power Settings via Group PolicyMay 18, 2005. Power Settings
> via Group Policy. I wanted to create a policy to set all of the laptops in
> the department to the same power scheme. ...
> http://blog.case.edu/djc6/2005/05/18/power_settings_via_grou p_policy
>
> Managing Power Settings in Windows XPAlthough you can't use Group Policy to
> manage power settings in XP, ... if a Group Policy Object (GPO) isn't
> supplied by default, you could create a custom ...
> http://windowsitpro.com/article/articleid/93924/managing-pow er-settings-in-windows-xp.html
>
>
>
> --
> Ace
>
> This posting is provided "AS-IS" with no warranties or guarantees and
> confers no rights.
>
> Please reply back to the newsgroup or forum to benefit from collaboration
> among responding engineers, and to help others benefit from your resolution.
>
> Ace Fekay, MCT, MCSE, MCSA 2003 & 2000, MCSA Messaging
> Microsoft Certified Trainer
> aceman@mvps.RemoveThisPart.org
> http://twitter.com/acefekay
>
> For urgent issues, you may want to contact Microsoft PSS directly. Please
> check http://support.microsoft.com for regional support phone numbers.
>
>
Re: GPO not applying properly [message #157769 is a reply to message #157766] Tue, 14 July 2009 10:49 Go to previous messageGo to next message
aceman  is currently offline aceman  United States
Messages: 5816
Registered: July 2009
Senior Member
"Mike" <Mike@discussions.microsoft.com> wrote in message
news:908C3E8E-B855-479E-BEB7-BA0E82FA4E4E@microsoft.com...
> Ace - man you saved me a lot of heart ache - that 3rd link says it all:
>
> "However, if, on the computer applying the preference item, a power scheme
> with the same name exists, the preference item does nothing"
>
> That's exactly what my problem was :)
>
> I wish that this was a little more readily available - I never would have
> found that blog or article.
>
> Thank you sir - You get 1 million points for the solution! :)
>

Mike,

Thanks for the plug. I'm glad it helped to find out what was going on!

Cheers!

Ace
Re: GPO not applying properly [message #157780 is a reply to message #157766] Tue, 14 July 2009 12:28 Go to previous messageGo to next message
meiweb(nospam)  is currently offline meiweb(nospam)  Germany
Messages: 1307
Registered: July 2009
Senior Member
Hello Mike,

As said in my previous posting:

"If you choose create, did you change the name, otherwise it wan't work?"

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> Ace - man you saved me a lot of heart ache - that 3rd link says it
> all:
>
> "However, if, on the computer applying the preference item, a power
> scheme with the same name exists, the preference item does nothing"
>
> That's exactly what my problem was :)
>
> I wish that this was a little more readily available - I never would
> have found that blog or article.
>
> Thank you sir - You get 1 million points for the solution! :)
>
> "Ace Fekay [MCT]" wrote:
>
>> "Mike" <Mike@discussions.microsoft.com> wrote in message
>> news:A97BC280-B44E-4CB7-8212-07DD5FB24204@microsoft.com...
>>
>>> I choose 'Create' using the Desktop profile and made only 1 change
>>> (the amount of minutes in which the montior would turn off).
>>>
>>> When running RSOP on that pc - it shows that it is applied, but when
>>> you look at the properties for the 'Turn off' it's still the default
>>> setting.
>>>
>> Mike,
>>
>> It seems you may have missed something fundamental when setting up
>> the Preferences. Take a look at the following articles, notably the
>> first one. I hope it helps.
>>
>> Ask the Directory Services Team : Managing Power with Group Policy
>> ...Mar
>> 21, 2008 ... (This is a three part article):
>> http://blogs.technet.com/askds/archive/2008/03/21/managing-p ower-with
>> -group-policy-part-1-of-3.aspx
>> http://blogs.technet.com/askds/archive/2008/03/21/managing-p ower-with
>> -group-policy-part-2-of-3.aspx
>> http://blogs.technet.com/askds/archive/2008/03/21/managing-p ower-with
>> -group-policy-part-3-of-3.aspx
>> David Carlin: Power Settings via Group PolicyMay 18, 2005. Power
>> Settings via Group Policy. I wanted to create a policy to set all of
>> the laptops in the department to the same power scheme. ...
>> http://blog.case.edu/djc6/2005/05/18/power_settings_via_grou p_policy
>>
>> Managing Power Settings in Windows XPAlthough you can't use Group
>> Policy to manage power settings in XP, ... if a Group Policy Object
>> (GPO) isn't supplied by default, you could create a custom ...
>> http://windowsitpro.com/article/articleid/93924/managing-pow er-settin
>> gs-in-windows-xp.html
>>
>> -- Ace
>>
>> This posting is provided "AS-IS" with no warranties or guarantees and
>> confers no rights.
>>
>> Please reply back to the newsgroup or forum to benefit from
>> collaboration among responding engineers, and to help others benefit
>> from your resolution.
>>
>> Ace Fekay, MCT, MCSE, MCSA 2003 & 2000, MCSA Messaging Microsoft
>> Certified Trainer aceman@mvps.RemoveThisPart.org
>> http://twitter.com/acefekay
>>
>> For urgent issues, you may want to contact Microsoft PSS directly.
>> Please check http://support.microsoft.com for regional support phone
>> numbers.
>>
Re: GPO not applying properly [message #157792 is a reply to message #157780] Tue, 14 July 2009 13:43 Go to previous messageGo to next message
aceman  is currently offline aceman  United States
Messages: 5816
Registered: July 2009
Senior Member
"Meinolf Weber [MVP-DS]" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb6629c288cbd2c8039116c8@msnews.microsoft.com...
> Hello Mike,
>
> As said in my previous posting:
>
> "If you choose create, did you change the name, otherwise it wan't work?"

That's right, you did mention that. Sorry for not referring back to it,
Meinolf.

Ace
Re: GPO not applying properly [message #157796 is a reply to message #157792] Tue, 14 July 2009 14:14 Go to previous messageGo to next message
meiweb(nospam)  is currently offline meiweb(nospam)  Germany
Messages: 1307
Registered: July 2009
Senior Member
Hello Ace Fekay [MCT],

No problem, was a small remark for the OP not for you.:-)

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> "Meinolf Weber [MVP-DS]" <meiweb(nospam)@gmx.de> wrote in message
> news:ff16fb6629c288cbd2c8039116c8@msnews.microsoft.com...
>
>> Hello Mike,
>>
>> As said in my previous posting:
>>
>> "If you choose create, did you change the name, otherwise it wan't
>> work?"
>>
> That's right, you did mention that. Sorry for not referring back to
> it, Meinolf.
>
> Ace
>
Re: GPO not applying properly [message #157800 is a reply to message #157796] Tue, 14 July 2009 14:44 Go to previous message
aceman  is currently offline aceman  United States
Messages: 5816
Registered: July 2009
Senior Member
"Meinolf Weber [MVP-DS]" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb6629c618cbd2d6c7e75ad8@msnews.microsoft.com...
> Hello Ace Fekay [MCT],
>
> No problem, was a small remark for the OP not for you.:-)
>
Oh, I know. I remembered seeing the name thing you mentioned. I just forgot
to reference it, as I would normally do.

Cheers!
Previous Topic:Restrict Desktop support from Adding Servers to the Domain
Next Topic:How best to add an icon to every users' desktop over the network
Goto Forum:
  


Current Time: Sat Oct 21 19:04:06 EDT 2017

Total time taken to generate the page: 0.03236 seconds
.:: Contact :: Home ::Sitemap::.

Powered by: FUDforum 3.0.0RC2.
Copyright ©2001-2009 FUDforum Bulletin Board Software