Forum Search:
Forum.Brain-Cluster.com: Brain Cluster Technical Forum
Ultimate forum for Technical Discussions

Home » Microsoft » Windows Server » Active Directory » SYSVOL Doesn't appear as shared in a Secondary Domain Controller
SYSVOL Doesn't appear as shared in a Secondary Domain Controller [message #159064] Thu, 23 July 2009 11:45 Go to next message
mosquito_hippy  is currently offline mosquito_hippy
Messages: 5
Registered: July 2009
Junior Member
Hi

I have read a lot possible solutions for this issue but i'm wondering if it
is not a better idea, since it's a secondary domain controller, simply demote
this secondary domain controller and then promote it as domain controller
again so this shared can be recreated.

What do you think?

Thanks in advance
Re: SYSVOL Doesn't appear as shared in a Secondary Domain Controller [message #159065 is a reply to message #159064] Thu, 23 July 2009 11:58 Go to previous messageGo to next message
Danny Sanders  is currently offline Danny Sanders  United States
Messages: 169
Registered: July 2009
Senior Member
How long has it been since it was originally promoted?


hth
DDS
"mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in message
news:D03A0FF3-E698-425E-9DE1-2BEA4108DFA1@microsoft.com...
> Hi
>
> I have read a lot possible solutions for this issue but i'm wondering if
> it
> is not a better idea, since it's a secondary domain controller, simply
> demote
> this secondary domain controller and then promote it as domain controller
> again so this shared can be recreated.
>
> What do you think?
>
> Thanks in advance
Re: SYSVOL Doesn't appear as shared in a Secondary Domain Controll [message #159066 is a reply to message #159065] Thu, 23 July 2009 12:16 Go to previous messageGo to next message
mosquito_hippy  is currently offline mosquito_hippy
Messages: 5
Registered: July 2009
Junior Member
Hi

May be a year a year and a half, but recently we moved from one office to
another and went through a network restructuration that forced us to change
ip addresses, may be it cause the problem, but since it happend almos two
months ago it's worthless to try to figure out if it was what cause the
problem.

My question is if instead of go through a process with multiple steps to
recover the sysvol, why not just demote and re-promote this server since
it's is a secondary one?

Thanks in advance


"Danny Sanders" wrote:

> How long has it been since it was originally promoted?
>
>
> hth
> DDS
> "mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in message
> news:D03A0FF3-E698-425E-9DE1-2BEA4108DFA1@microsoft.com...
> > Hi
> >
> > I have read a lot possible solutions for this issue but i'm wondering if
> > it
> > is not a better idea, since it's a secondary domain controller, simply
> > demote
> > this secondary domain controller and then promote it as domain controller
> > again so this shared can be recreated.
> >
> > What do you think?
> >
> > Thanks in advance
>
>
>
Re: SYSVOL Doesn't appear as shared in a Secondary Domain Controll [message #159068 is a reply to message #159066] Thu, 23 July 2009 12:53 Go to previous messageGo to next message
Danny Sanders  is currently offline Danny Sanders  United States
Messages: 169
Registered: July 2009
Senior Member
I have seen where it takes some time for the sysvol to become shareed after
prmoting the server to DC.
I would try demoting it and re promoting it.

hth
DDS

"mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in message
news:0AE4D8D6-94ED-426E-A866-5D3F0F2243B9@microsoft.com...
> Hi
>
> May be a year a year and a half, but recently we moved from one office to
> another and went through a network restructuration that forced us to
> change
> ip addresses, may be it cause the problem, but since it happend almos two
> months ago it's worthless to try to figure out if it was what cause the
> problem.
>
> My question is if instead of go through a process with multiple steps to
> recover the sysvol, why not just demote and re-promote this server since
> it's is a secondary one?
>
> Thanks in advance
>
>
> "Danny Sanders" wrote:
>
>> How long has it been since it was originally promoted?
>>
>>
>> hth
>> DDS
>> "mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in
>> message
>> news:D03A0FF3-E698-425E-9DE1-2BEA4108DFA1@microsoft.com...
>> > Hi
>> >
>> > I have read a lot possible solutions for this issue but i'm wondering
>> > if
>> > it
>> > is not a better idea, since it's a secondary domain controller, simply
>> > demote
>> > this secondary domain controller and then promote it as domain
>> > controller
>> > again so this shared can be recreated.
>> >
>> > What do you think?
>> >
>> > Thanks in advance
>>
>>
>>
Re: SYSVOL Doesn't appear as shared in a Secondary Domain Controll [message #159069 is a reply to message #159068] Thu, 23 July 2009 13:03 Go to previous messageGo to next message
mosquito_hippy  is currently offline mosquito_hippy
Messages: 5
Registered: July 2009
Junior Member
Thanks i'll try

"Danny Sanders" wrote:

> I have seen where it takes some time for the sysvol to become shareed after
> prmoting the server to DC.
> I would try demoting it and re promoting it.
>
> hth
> DDS
>
> "mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in message
> news:0AE4D8D6-94ED-426E-A866-5D3F0F2243B9@microsoft.com...
> > Hi
> >
> > May be a year a year and a half, but recently we moved from one office to
> > another and went through a network restructuration that forced us to
> > change
> > ip addresses, may be it cause the problem, but since it happend almos two
> > months ago it's worthless to try to figure out if it was what cause the
> > problem.
> >
> > My question is if instead of go through a process with multiple steps to
> > recover the sysvol, why not just demote and re-promote this server since
> > it's is a secondary one?
> >
> > Thanks in advance
> >
> >
> > "Danny Sanders" wrote:
> >
> >> How long has it been since it was originally promoted?
> >>
> >>
> >> hth
> >> DDS
> >> "mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in
> >> message
> >> news:D03A0FF3-E698-425E-9DE1-2BEA4108DFA1@microsoft.com...
> >> > Hi
> >> >
> >> > I have read a lot possible solutions for this issue but i'm wondering
> >> > if
> >> > it
> >> > is not a better idea, since it's a secondary domain controller, simply
> >> > demote
> >> > this secondary domain controller and then promote it as domain
> >> > controller
> >> > again so this shared can be recreated.
> >> >
> >> > What do you think?
> >> >
> >> > Thanks in advance
> >>
> >>
> >>
>
>
>
Re: SYSVOL Doesn't appear as shared in a Secondary Domain Controll [message #159071 is a reply to message #159066] Thu, 23 July 2009 13:03 Go to previous messageGo to next message
Jorge Silva  is currently offline Jorge Silva
Messages: 398
Registered: July 2009
Senior Member
Hi
What errors do you have in event log?

--
I hope that the information above helps you.
Have a Nice day.

Jorge Silva
MVP Directory Services
"mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in message
news:0AE4D8D6-94ED-426E-A866-5D3F0F2243B9@microsoft.com...
> Hi
>
> May be a year a year and a half, but recently we moved from one office to
> another and went through a network restructuration that forced us to
> change
> ip addresses, may be it cause the problem, but since it happend almos two
> months ago it's worthless to try to figure out if it was what cause the
> problem.
>
> My question is if instead of go through a process with multiple steps to
> recover the sysvol, why not just demote and re-promote this server since
> it's is a secondary one?
>
> Thanks in advance
>
>
> "Danny Sanders" wrote:
>
>> How long has it been since it was originally promoted?
>>
>>
>> hth
>> DDS
>> "mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in
>> message
>> news:D03A0FF3-E698-425E-9DE1-2BEA4108DFA1@microsoft.com...
>> > Hi
>> >
>> > I have read a lot possible solutions for this issue but i'm wondering
>> > if
>> > it
>> > is not a better idea, since it's a secondary domain controller, simply
>> > demote
>> > this secondary domain controller and then promote it as domain
>> > controller
>> > again so this shared can be recreated.
>> >
>> > What do you think?
>> >
>> > Thanks in advance
>>
>>
>>
Re: SYSVOL Doesn't appear as shared in a Secondary Domain Controller [message #159072 is a reply to message #159064] Thu, 23 July 2009 13:37 Go to previous messageGo to next message
pbbergs  is currently offline pbbergs  United States
Messages: 1024
Registered: July 2009
Senior Member
Evevn if you repromote it may not work. Find out why it is broke.

Run diagnostics against your Active Directory domain.

If you don't have the support tools installed, install them from your server
install disk.
d:\support\tools\setup.exe

Run dcdiag, netdiag and repadmin in verbose mode.
-> DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log
-> netdiag.exe /v > c:\netdiag.log (On each dc)
-> repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt
-> ntfrsutl ds your_dc_name > c:\sysvol.log
-> dnslint /ad /s "ip address of your dc"

**Note: Using the /E switch in dcdiag will run diagnostics against ALL dc's
in the forest. If you have significant numbers of DC's this test could
generate significant detail and take a long time. You also want to take into
account slow links to dc's will also add to the testing time.

If you download a gui script I wrote it should be simple to set and run
(DCDiag and NetDiag). It also has the option to run individual tests without
having to learn all the switch options. The details will be output in
notepad text files that pop up automagically.

The script is located on my website at
http://www.pbbergs.com/windows/downloads.htm

Just select both dcdiag and netdiag make sure verbose is set. (Leave the
default settings for dcdiag as set when selected)

When complete search for fail, error and warning messages.

Description and download for dnslint
http://support.microsoft.com/kb/321045

--
Paul Bergson
MVP - Directory Services
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, 2003, 2000 (Early Achiever), NT4
Microsoft's Thrive IT Pro of the Month - June 2009

http://www.pbbergs.com

Please no e-mails, any questions should be posted in the NewsGroup This
posting is provided "AS IS" with no warranties, and confers no rights.

"mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in message
news:D03A0FF3-E698-425E-9DE1-2BEA4108DFA1@microsoft.com...
> Hi
>
> I have read a lot possible solutions for this issue but i'm wondering if
> it
> is not a better idea, since it's a secondary domain controller, simply
> demote
> this secondary domain controller and then promote it as domain controller
> again so this shared can be recreated.
>
> What do you think?
>
> Thanks in advance
Re: SYSVOL Doesn't appear as shared in a Secondary Domain Controll [message #159074 is a reply to message #159072] Thu, 23 July 2009 14:12 Go to previous messageGo to next message
mosquito_hippy  is currently offline mosquito_hippy
Messages: 5
Registered: July 2009
Junior Member
You are right but...

But it could work isn't it?

Any way i won't waste anything but time, if it does work it would be faster
than pass through all the diagnostic process, don't you think?

Thanks in advance

"Paul Bergson [MVP-DS]" wrote:

> Evevn if you repromote it may not work. Find out why it is broke.
>
> Run diagnostics against your Active Directory domain.
>
> If you don't have the support tools installed, install them from your server
> install disk.
> d:\support\tools\setup.exe
>
> Run dcdiag, netdiag and repadmin in verbose mode.
> -> DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log
> -> netdiag.exe /v > c:\netdiag.log (On each dc)
> -> repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt
> -> ntfrsutl ds your_dc_name > c:\sysvol.log
> -> dnslint /ad /s "ip address of your dc"
>
> **Note: Using the /E switch in dcdiag will run diagnostics against ALL dc's
> in the forest. If you have significant numbers of DC's this test could
> generate significant detail and take a long time. You also want to take into
> account slow links to dc's will also add to the testing time.
>
> If you download a gui script I wrote it should be simple to set and run
> (DCDiag and NetDiag). It also has the option to run individual tests without
> having to learn all the switch options. The details will be output in
> notepad text files that pop up automagically.
>
> The script is located on my website at
> http://www.pbbergs.com/windows/downloads.htm
>
> Just select both dcdiag and netdiag make sure verbose is set. (Leave the
> default settings for dcdiag as set when selected)
>
> When complete search for fail, error and warning messages.
>
> Description and download for dnslint
> http://support.microsoft.com/kb/321045
>
> --
> Paul Bergson
> MVP - Directory Services
> MCTS, MCT, MCSE, MCSA, Security+, BS CSci
> 2008, 2003, 2000 (Early Achiever), NT4
> Microsoft's Thrive IT Pro of the Month - June 2009
>
> http://www.pbbergs.com
>
> Please no e-mails, any questions should be posted in the NewsGroup This
> posting is provided "AS IS" with no warranties, and confers no rights.
>
> "mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in message
> news:D03A0FF3-E698-425E-9DE1-2BEA4108DFA1@microsoft.com...
> > Hi
> >
> > I have read a lot possible solutions for this issue but i'm wondering if
> > it
> > is not a better idea, since it's a secondary domain controller, simply
> > demote
> > this secondary domain controller and then promote it as domain controller
> > again so this shared can be recreated.
> >
> > What do you think?
> >
> > Thanks in advance
>
>
>
Re: SYSVOL Doesn't appear as shared in a Secondary Domain Controll [message #159077 is a reply to message #159074] Thu, 23 July 2009 14:45 Go to previous messageGo to next message
pbbergs  is currently offline pbbergs  United States
Messages: 1024
Registered: July 2009
Senior Member
No. I think you should figure out what is going on. The diags will give
you info on your domain. If you are having connectivity problems the
dcpromo demote will fail anyways.

--
Paul Bergson
MVP - Directory Services
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, 2003, 2000 (Early Achiever), NT4
Microsoft's Thrive IT Pro of the Month - June 2009

http://www.pbbergs.com

Please no e-mails, any questions should be posted in the NewsGroup This
posting is provided "AS IS" with no warranties, and confers no rights.

"mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in message
news:3518D3C1-F78D-476A-B066-D5CE5D1DD8F5@microsoft.com...
> You are right but...
>
> But it could work isn't it?
>
> Any way i won't waste anything but time, if it does work it would be
> faster
> than pass through all the diagnostic process, don't you think?
>
> Thanks in advance
>
> "Paul Bergson [MVP-DS]" wrote:
>
>> Evevn if you repromote it may not work. Find out why it is broke.
>>
>> Run diagnostics against your Active Directory domain.
>>
>> If you don't have the support tools installed, install them from your
>> server
>> install disk.
>> d:\support\tools\setup.exe
>>
>> Run dcdiag, netdiag and repadmin in verbose mode.
>> -> DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log
>> -> netdiag.exe /v > c:\netdiag.log (On each dc)
>> -> repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt
>> -> ntfrsutl ds your_dc_name > c:\sysvol.log
>> -> dnslint /ad /s "ip address of your dc"
>>
>> **Note: Using the /E switch in dcdiag will run diagnostics against ALL
>> dc's
>> in the forest. If you have significant numbers of DC's this test could
>> generate significant detail and take a long time. You also want to take
>> into
>> account slow links to dc's will also add to the testing time.
>>
>> If you download a gui script I wrote it should be simple to set and run
>> (DCDiag and NetDiag). It also has the option to run individual tests
>> without
>> having to learn all the switch options. The details will be output in
>> notepad text files that pop up automagically.
>>
>> The script is located on my website at
>> http://www.pbbergs.com/windows/downloads.htm
>>
>> Just select both dcdiag and netdiag make sure verbose is set. (Leave the
>> default settings for dcdiag as set when selected)
>>
>> When complete search for fail, error and warning messages.
>>
>> Description and download for dnslint
>> http://support.microsoft.com/kb/321045
>>
>> --
>> Paul Bergson
>> MVP - Directory Services
>> MCTS, MCT, MCSE, MCSA, Security+, BS CSci
>> 2008, 2003, 2000 (Early Achiever), NT4
>> Microsoft's Thrive IT Pro of the Month - June 2009
>>
>> http://www.pbbergs.com
>>
>> Please no e-mails, any questions should be posted in the NewsGroup This
>> posting is provided "AS IS" with no warranties, and confers no rights.
>>
>> "mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in
>> message
>> news:D03A0FF3-E698-425E-9DE1-2BEA4108DFA1@microsoft.com...
>> > Hi
>> >
>> > I have read a lot possible solutions for this issue but i'm wondering
>> > if
>> > it
>> > is not a better idea, since it's a secondary domain controller, simply
>> > demote
>> > this secondary domain controller and then promote it as domain
>> > controller
>> > again so this shared can be recreated.
>> >
>> > What do you think?
>> >
>> > Thanks in advance
>>
>>
>>
Re: SYSVOL Doesn't appear as shared in a Secondary Domain Controller [message #159104 is a reply to message #159064] Fri, 24 July 2009 03:56 Go to previous messageGo to next message
meiweb(nospam)  is currently offline meiweb(nospam)  Germany
Messages: 1307
Registered: July 2009
Senior Member
Hello mosquito_hippy,

I agree with Paul to find the reason why it doesn't replicate and then you
can think about removing or trying to get replication working again. Also
as mentioned from Jorge check the DS event viewer for errors and post them
here.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> Hi
>
> I have read a lot possible solutions for this issue but i'm wondering
> if it is not a better idea, since it's a secondary domain controller,
> simply demote this secondary domain controller and then promote it as
> domain controller again so this shared can be recreated.
>
> What do you think?
>
> Thanks in advance
>
Re: SYSVOL Doesn't appear as shared in a Secondary Domain Controll [message #159108 is a reply to message #159074] Fri, 24 July 2009 06:32 Go to previous messageGo to next message
Jorge Silva  is currently offline Jorge Silva
Messages: 398
Registered: July 2009
Senior Member
If you're not worried about the problem and the priority is to have the DC
up and running, yes.

--
I hope that the information above helps you.
Have a Nice day.

Jorge Silva
MVP Directory Services
"mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in message
news:3518D3C1-F78D-476A-B066-D5CE5D1DD8F5@microsoft.com...
> You are right but...
>
> But it could work isn't it?
>
> Any way i won't waste anything but time, if it does work it would be
> faster
> than pass through all the diagnostic process, don't you think?
>
> Thanks in advance
>
> "Paul Bergson [MVP-DS]" wrote:
>
>> Evevn if you repromote it may not work. Find out why it is broke.
>>
>> Run diagnostics against your Active Directory domain.
>>
>> If you don't have the support tools installed, install them from your
>> server
>> install disk.
>> d:\support\tools\setup.exe
>>
>> Run dcdiag, netdiag and repadmin in verbose mode.
>> -> DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log
>> -> netdiag.exe /v > c:\netdiag.log (On each dc)
>> -> repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt
>> -> ntfrsutl ds your_dc_name > c:\sysvol.log
>> -> dnslint /ad /s "ip address of your dc"
>>
>> **Note: Using the /E switch in dcdiag will run diagnostics against ALL
>> dc's
>> in the forest. If you have significant numbers of DC's this test could
>> generate significant detail and take a long time. You also want to take
>> into
>> account slow links to dc's will also add to the testing time.
>>
>> If you download a gui script I wrote it should be simple to set and run
>> (DCDiag and NetDiag). It also has the option to run individual tests
>> without
>> having to learn all the switch options. The details will be output in
>> notepad text files that pop up automagically.
>>
>> The script is located on my website at
>> http://www.pbbergs.com/windows/downloads.htm
>>
>> Just select both dcdiag and netdiag make sure verbose is set. (Leave the
>> default settings for dcdiag as set when selected)
>>
>> When complete search for fail, error and warning messages.
>>
>> Description and download for dnslint
>> http://support.microsoft.com/kb/321045
>>
>> --
>> Paul Bergson
>> MVP - Directory Services
>> MCTS, MCT, MCSE, MCSA, Security+, BS CSci
>> 2008, 2003, 2000 (Early Achiever), NT4
>> Microsoft's Thrive IT Pro of the Month - June 2009
>>
>> http://www.pbbergs.com
>>
>> Please no e-mails, any questions should be posted in the NewsGroup This
>> posting is provided "AS IS" with no warranties, and confers no rights.
>>
>> "mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in
>> message
>> news:D03A0FF3-E698-425E-9DE1-2BEA4108DFA1@microsoft.com...
>> > Hi
>> >
>> > I have read a lot possible solutions for this issue but i'm wondering
>> > if
>> > it
>> > is not a better idea, since it's a secondary domain controller, simply
>> > demote
>> > this secondary domain controller and then promote it as domain
>> > controller
>> > again so this shared can be recreated.
>> >
>> > What do you think?
>> >
>> > Thanks in advance
>>
>>
>>
Re: SYSVOL Doesn't appear as shared in a Secondary Domain Controll [message #159394 is a reply to message #159077] Wed, 29 July 2009 10:38 Go to previous message
mosquito_hippy  is currently offline mosquito_hippy
Messages: 5
Registered: July 2009
Junior Member
Thanks Paul

I demoted the server, first time it didn't work it appears to be unable to
shutdown the netlogon server, when i checked it was down, i restarted it and
run dcpromo to demote the server again, this time it worked. Afterwards i
repromoted this server as domain controller with dcpromo, it worked flawless,
after it restarted i checked and sysvol wasn't shares yet but few minutes
later it was shared.

Now when i type net share it shows sysvol and netlogon as shared resources.

I don't know if it is the proper way, but i found the sysvol restoring
procedure kind of complicated and i'm kind of lazy.

Thank you all



"Paul Bergson [MVP-DS]" wrote:

> No. I think you should figure out what is going on. The diags will give
> you info on your domain. If you are having connectivity problems the
> dcpromo demote will fail anyways.
>
> --
> Paul Bergson
> MVP - Directory Services
> MCTS, MCT, MCSE, MCSA, Security+, BS CSci
> 2008, 2003, 2000 (Early Achiever), NT4
> Microsoft's Thrive IT Pro of the Month - June 2009
>
> http://www.pbbergs.com
>
> Please no e-mails, any questions should be posted in the NewsGroup This
> posting is provided "AS IS" with no warranties, and confers no rights.
>
> "mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in message
> news:3518D3C1-F78D-476A-B066-D5CE5D1DD8F5@microsoft.com...
> > You are right but...
> >
> > But it could work isn't it?
> >
> > Any way i won't waste anything but time, if it does work it would be
> > faster
> > than pass through all the diagnostic process, don't you think?
> >
> > Thanks in advance
> >
> > "Paul Bergson [MVP-DS]" wrote:
> >
> >> Evevn if you repromote it may not work. Find out why it is broke.
> >>
> >> Run diagnostics against your Active Directory domain.
> >>
> >> If you don't have the support tools installed, install them from your
> >> server
> >> install disk.
> >> d:\support\tools\setup.exe
> >>
> >> Run dcdiag, netdiag and repadmin in verbose mode.
> >> -> DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log
> >> -> netdiag.exe /v > c:\netdiag.log (On each dc)
> >> -> repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt
> >> -> ntfrsutl ds your_dc_name > c:\sysvol.log
> >> -> dnslint /ad /s "ip address of your dc"
> >>
> >> **Note: Using the /E switch in dcdiag will run diagnostics against ALL
> >> dc's
> >> in the forest. If you have significant numbers of DC's this test could
> >> generate significant detail and take a long time. You also want to take
> >> into
> >> account slow links to dc's will also add to the testing time.
> >>
> >> If you download a gui script I wrote it should be simple to set and run
> >> (DCDiag and NetDiag). It also has the option to run individual tests
> >> without
> >> having to learn all the switch options. The details will be output in
> >> notepad text files that pop up automagically.
> >>
> >> The script is located on my website at
> >> http://www.pbbergs.com/windows/downloads.htm
> >>
> >> Just select both dcdiag and netdiag make sure verbose is set. (Leave the
> >> default settings for dcdiag as set when selected)
> >>
> >> When complete search for fail, error and warning messages.
> >>
> >> Description and download for dnslint
> >> http://support.microsoft.com/kb/321045
> >>
> >> --
> >> Paul Bergson
> >> MVP - Directory Services
> >> MCTS, MCT, MCSE, MCSA, Security+, BS CSci
> >> 2008, 2003, 2000 (Early Achiever), NT4
> >> Microsoft's Thrive IT Pro of the Month - June 2009
> >>
> >> http://www.pbbergs.com
> >>
> >> Please no e-mails, any questions should be posted in the NewsGroup This
> >> posting is provided "AS IS" with no warranties, and confers no rights.
> >>
> >> "mosquito_hippy" <mosquitohippy@discussions.microsoft.com> wrote in
> >> message
> >> news:D03A0FF3-E698-425E-9DE1-2BEA4108DFA1@microsoft.com...
> >> > Hi
> >> >
> >> > I have read a lot possible solutions for this issue but i'm wondering
> >> > if
> >> > it
> >> > is not a better idea, since it's a secondary domain controller, simply
> >> > demote
> >> > this secondary domain controller and then promote it as domain
> >> > controller
> >> > again so this shared can be recreated.
> >> >
> >> > What do you think?
> >> >
> >> > Thanks in advance
> >>
> >>
> >>
>
>
>
Previous Topic:AD Object Not updated
Next Topic:LDAPS not working
Goto Forum:
  


Current Time: Sat Jan 20 08:29:48 MST 2018

Total time taken to generate the page: 0.04144 seconds
.:: Contact :: Home ::Sitemap::.

Powered by: FUDforum 3.0.0RC2.
Copyright ©2001-2009 FUDforum Bulletin Board Software