Forum Search:
Forum.Brain-Cluster.com: Brain Cluster Technical Forum
Ultimate forum for Technical Discussions

Home » Microsoft » Windows Server » Active Directory » RIDC inbound connection object
RIDC inbound connection object [message #161956] Sun, 11 October 2009 09:07 Go to next message
southpaw  is currently offline southpaw  United States
Messages: 61
Registered: July 2009
Member
Hi all,

I installed my first RODC and noticed there is only one outbound connection
object labeled (FRS), shouldn't there be two connection objects ?

On MS site it states two outbound connection objects are created .Been
several hours and still only one connection object .I also ran repadmin /kcc
... still no luck..


Here is the
link..http://technet.microsoft.com/en-us/library/cc754956(WS.10).aspx .
Re: RIDC inbound connection object [message #161961 is a reply to message #161956] Sun, 11 October 2009 13:35 Go to previous messageGo to next message
meiweb  is currently offline meiweb  Germany
Messages: 2225
Registered: September 2009
Senior Member
Hello southpaw,

On the website is stated two INBOUND connection objects, not outbound.

"Why does an RODC have two inbound connection objects?

This is because File Replication Service (FRS) requires its own pair of connection
objects in order to function correctly.

In previous versions of Windows Server, FRS was able to utilize the existing
connection objects between two domain controllers to support its replication
of SYSVOL content. However, because an RODC only performs inbound replication
of Active Directory data, a reciprocal connection object on the writable
replication partner is not needed."

So is this a typo in your posting?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> Hi all,
>
> I installed my first RODC and noticed there is only one outbound
> connection object labeled (FRS), shouldn't there be two connection
> objects ?
>
> On MS site it states two outbound connection objects are created
> .Been several hours and still only one connection object .I also ran
> repadmin /kcc .. still no luck..
>
> Here is the
> link..http://technet.microsoft.com/en-us/library/cc754956(WS.10).aspx
> .
>
Re: RIDC inbound connection object [message #161962 is a reply to message #161961] Sun, 11 October 2009 16:33 Go to previous messageGo to next message
southpaw  is currently offline southpaw  United States
Messages: 61
Registered: July 2009
Member
Hi Meinolf,

Sorry not sure i understand. So if I login to an RODC and launch sites and
services should there be two connection objects (FRS and AD) ?

thanks

"Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message
news:6cb2911d75458cc18d1e7e7e5ef@msnews.microsoft.com...
> Hello southpaw,
>
> On the website is stated two INBOUND connection objects, not outbound.
>
> "Why does an RODC have two inbound connection objects?
> This is because File Replication Service (FRS) requires its own pair of
> connection objects in order to function correctly.
> In previous versions of Windows Server, FRS was able to utilize the
> existing connection objects between two domain controllers to support its
> replication of SYSVOL content. However, because an RODC only performs
> inbound replication of Active Directory data, a reciprocal connection
> object on the writable replication partner is not needed."
>
> So is this a typo in your posting?
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> Hi all,
>>
>> I installed my first RODC and noticed there is only one outbound
>> connection object labeled (FRS), shouldn't there be two connection
>> objects ?
>>
>> On MS site it states two outbound connection objects are created
>> .Been several hours and still only one connection object .I also ran
>> repadmin /kcc .. still no luck..
>>
>> Here is the
>> link..http://technet.microsoft.com/en-us/library/cc754956(WS.10).aspx
>> .
>>
>
>
Re: RIDC inbound connection object [message #161963 is a reply to message #161962] Sun, 11 October 2009 16:46 Go to previous messageGo to next message
southpaw  is currently offline southpaw  United States
Messages: 61
Registered: July 2009
Member
Great ! its working now...
I just logged in again and noticed the two inbound connection objects
"automatically generated and frs.
Not sure what happen previously there was only one object (frs)...


"southpaw" <southpaw@nospam.com> wrote in message
news:uuS6LLsSKHA.1792@TK2MSFTNGP04.phx.gbl...
> Hi Meinolf,
>
> Sorry not sure i understand. So if I login to an RODC and launch sites and
> services should there be two connection objects (FRS and AD) ?
>
> thanks
>
> "Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message
> news:6cb2911d75458cc18d1e7e7e5ef@msnews.microsoft.com...
>> Hello southpaw,
>>
>> On the website is stated two INBOUND connection objects, not outbound.
>>
>> "Why does an RODC have two inbound connection objects?
>> This is because File Replication Service (FRS) requires its own pair of
>> connection objects in order to function correctly.
>> In previous versions of Windows Server, FRS was able to utilize the
>> existing connection objects between two domain controllers to support its
>> replication of SYSVOL content. However, because an RODC only performs
>> inbound replication of Active Directory data, a reciprocal connection
>> object on the writable replication partner is not needed."
>>
>> So is this a typo in your posting?
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>
>>> Hi all,
>>>
>>> I installed my first RODC and noticed there is only one outbound
>>> connection object labeled (FRS), shouldn't there be two connection
>>> objects ?
>>>
>>> On MS site it states two outbound connection objects are created
>>> .Been several hours and still only one connection object .I also ran
>>> repadmin /kcc .. still no luck..
>>>
>>> Here is the
>>> link..http://technet.microsoft.com/en-us/library/cc754956(WS.10).aspx
>>> .
>>>
>>
>>
>
>
Re: RIDC inbound connection object [message #161965 is a reply to message #161963] Sun, 11 October 2009 18:57 Go to previous messageGo to next message
aceman  is currently offline aceman  United States
Messages: 5816
Registered: July 2009
Senior Member
"southpaw" <southpaw@nospam.com> wrote in message
news:OfRZ1SsSKHA.1232@TK2MSFTNGP05.phx.gbl...

The lage may have due to replication latency on the connection object.
What's it set to?

Ace

--
Ace

This posting is provided "AS-IS" with no warranties or guarantees and
confers no rights.

Please reply back to the newsgroup or forum for collaboration benefit among
responding engineers, and to help others benefit from your resolution.

Ace Fekay, MCT, MCTS 2008, MCTS Exchange, MCSE, MCSA 2003 & 2000, MCSA
Messaging
Microsoft Certified Trainer

For urgent issues, please contact Microsoft PSS directly. Please check
http://support.microsoft.com for regional support phone numbers.

> Great ! its working now...
> I just logged in again and noticed the two inbound connection objects
> "automatically generated and frs.
> Not sure what happen previously there was only one object (frs)...
>
>
> "southpaw" <southpaw@nospam.com> wrote in message
> news:uuS6LLsSKHA.1792@TK2MSFTNGP04.phx.gbl...
>> Hi Meinolf,
>>
>> Sorry not sure i understand. So if I login to an RODC and launch sites
>> and services should there be two connection objects (FRS and AD) ?
>>
>> thanks
>>
>> "Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message
>> news:6cb2911d75458cc18d1e7e7e5ef@msnews.microsoft.com...
>>> Hello southpaw,
>>>
>>> On the website is stated two INBOUND connection objects, not outbound.
>>>
>>> "Why does an RODC have two inbound connection objects?
>>> This is because File Replication Service (FRS) requires its own pair of
>>> connection objects in order to function correctly.
>>> In previous versions of Windows Server, FRS was able to utilize the
>>> existing connection objects between two domain controllers to support
>>> its replication of SYSVOL content. However, because an RODC only
>>> performs inbound replication of Active Directory data, a reciprocal
>>> connection object on the writable replication partner is not needed."
>>>
>>> So is this a typo in your posting?
>>>
>>> Best regards
>>>
>>> Meinolf Weber
>>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>>> confers no rights.
>>> ** Please do NOT email, only reply to Newsgroups
>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>>
>>>> Hi all,
>>>>
>>>> I installed my first RODC and noticed there is only one outbound
>>>> connection object labeled (FRS), shouldn't there be two connection
>>>> objects ?
>>>>
>>>> On MS site it states two outbound connection objects are created
>>>> .Been several hours and still only one connection object .I also ran
>>>> repadmin /kcc .. still no luck..
>>>>
>>>> Here is the
>>>> link..http://technet.microsoft.com/en-us/library/cc754956(WS.10).aspx
>>>> .
>>>>
>>>
>>>
>>
>>
>
>
Re: RIDC inbound connection object [message #161966 is a reply to message #161962] Sun, 11 October 2009 23:16 Go to previous messageGo to next message
meiweb  is currently offline meiweb  Germany
Messages: 2225
Registered: September 2009
Senior Member
Hello southpaw,

You wrote about inbound in the header and outbound in the posting content.
And 2 inbound replication objects are created not outbound. That's the reason
for my question.

But nice to hear that it is working. And as Ace already stated replication
needs time.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> Hi Meinolf,
>
> Sorry not sure i understand. So if I login to an RODC and launch sites
> and services should there be two connection objects (FRS and AD) ?
>
> thanks
>
> "Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message
> news:6cb2911d75458cc18d1e7e7e5ef@msnews.microsoft.com...
>
>> Hello southpaw,
>>
>> On the website is stated two INBOUND connection objects, not
>> outbound.
>>
>> "Why does an RODC have two inbound connection objects?
>> This is because File Replication Service (FRS) requires its own pair
>> of
>> connection objects in order to function correctly.
>> In previous versions of Windows Server, FRS was able to utilize the
>> existing connection objects between two domain controllers to support
>> its
>> replication of SYSVOL content. However, because an RODC only performs
>> inbound replication of Active Directory data, a reciprocal connection
>> object on the writable replication partner is not needed."
>> So is this a typo in your posting?
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> Hi all,
>>>
>>> I installed my first RODC and noticed there is only one outbound
>>> connection object labeled (FRS), shouldn't there be two connection
>>> objects ?
>>>
>>> On MS site it states two outbound connection objects are created
>>> .Been several hours and still only one connection object .I also ran
>>> repadmin /kcc .. still no luck..
>>>
>>> Here is the
>>> link..http://technet.microsoft.com/en-us/library/cc754956(WS.10).asp
>>> x .
>>>
Re: RIDC inbound connection object [message #161968 is a reply to message #161956] Mon, 12 October 2009 05:07 Go to previous messageGo to next message
Jorge Silva  is currently offline Jorge Silva
Messages: 398
Registered: July 2009
Senior Member
Hi
Patience is everything...
And yes, only inbound replications for RODCs.

--
I hope that the information above helps you.
Have a Nice day.
Jorge Silva
MVP Directory Services

Please no e-mails, any questions should be posted in the NewsGroup
This posting is provided "AS IS" with no warranties, and confers no rights.



"southpaw" <southpaw@nospam.com> wrote in message
news:OIccLSoSKHA.4028@TK2MSFTNGP05.phx.gbl...
> Hi all,
>
> I installed my first RODC and noticed there is only one outbound
> connection object labeled (FRS), shouldn't there be two connection objects
> ?
>
> On MS site it states two outbound connection objects are created .Been
> several hours and still only one connection object .I also ran repadmin
> /kcc .. still no luck..
>
>
> Here is the
> link..http://technet.microsoft.com/en-us/library/cc754956(WS.10).aspx .
>
>
Re: RIDC inbound connection object [message #291162 is a reply to message #161968] Mon, 19 October 2009 18:37 Go to previous message
southpaw  is currently offline southpaw  United States
Messages: 61
Registered: July 2009
Member
Thanks

"Jorge Silva" <jorgesilva_pt@hotmail.com> wrote in message
news:80F636CE-17C1-4D81-A3BC-11CF097D6C5C@microsoft.com...
> Hi
> Patience is everything...
> And yes, only inbound replications for RODCs.
>
> --
> I hope that the information above helps you.
> Have a Nice day.
> Jorge Silva
> MVP Directory Services
>
> Please no e-mails, any questions should be posted in the NewsGroup
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
>
>
> "southpaw" <southpaw@nospam.com> wrote in message
> news:OIccLSoSKHA.4028@TK2MSFTNGP05.phx.gbl...
>> Hi all,
>>
>> I installed my first RODC and noticed there is only one outbound
>> connection object labeled (FRS), shouldn't there be two connection
>> objects ?
>>
>> On MS site it states two outbound connection objects are created .Been
>> several hours and still only one connection object .I also ran repadmin
>> /kcc .. still no luck..
>>
>>
>> Here is the
>> link..http://technet.microsoft.com/en-us/library/cc754956(WS.10).aspx .
>>
>>
Previous Topic:Adprep and DCpromo catch 22
Next Topic:Gateway & proxy settings through GPO
Goto Forum:
  


Current Time: Sat Jan 20 08:30:12 MST 2018

Total time taken to generate the page: 0.05777 seconds
.:: Contact :: Home ::Sitemap::.

Powered by: FUDforum 3.0.0RC2.
Copyright ©2001-2009 FUDforum Bulletin Board Software