Forum Search:
Forum.Brain-Cluster.com: Brain Cluster Technical Forum
Ultimate forum for Technical Discussions

Home » Microsoft » Windows Server » Server Clustering » Address is not valid...
Address is not valid... [message #346089] Wed, 16 December 2009 19:32 Go to next message
Roger  is currently offline Roger  Canada
Messages: 134
Registered: August 2009
Senior Member
I have a network set up and I am trying to make a failover cluster.


The parts of the network that are relevant are the SAN drive (10.0.0.10
255.255.255.192)
Two Servers running Win2k8:

Server 1 two paths to SAN drive using (10.0.0.30, 10.0.0.31 -
255.255.255.192)
Teamed Nic to main 'network' 10.0.0.70 - 255.255.255.192

Server 2 two paths to SAN drive using (10.0.0.32, 10.0.0.33 -
255.255.255.192)
Teamed Nic to main 'network' 10.0.0.71 - 255.255.255.192

The servers passed the Cluster test.

When I attempt to make the cluster I assign the IP 10.0.0.72 to the cluster
and give it the name 'Mail' (it's a mail server fail-over cluster).
(It shows: 10.0.0.0/26 and a space for me to type my IP)

I get the response that:

Address 10.0.0.72 is not valid for it's associated network
Re: Address is not valid... [message #347345 is a reply to message #346089] Fri, 18 December 2009 03:51 Go to previous message
Saurav Rohilla  is currently offline Saurav Rohilla  India
Messages: 7
Registered: December 2009
Junior Member
On Dec 17, 5:32 am, "Roger" <roger...@vnet.on.ca> wrote:
> I have a network set up and I am trying to make a failover cluster.
>
> The parts of the network that are relevant are the SAN drive (10.0.0.10
> 255.255.255.192)
> Two Servers running Win2k8:
>
> Server 1 two paths to SAN drive using (10.0.0.30, 10.0.0.31 -
> 255.255.255.192)
> Teamed Nic to main 'network' 10.0.0.70 - 255.255.255.192
>
> Server 2 two paths to SAN drive using (10.0.0.32, 10.0.0.33 -
> 255.255.255.192)
> Teamed Nic to main 'network' 10.0.0.71 - 255.255.255.192
>
> The servers passed the Cluster test.
>
> When I attempt to make the cluster I assign the IP 10.0.0.72 to the cluster
> and give it the name 'Mail' (it's a mail server fail-over cluster).
> (It shows: 10.0.0.0/26 and a space for me to type my IP)
>
> I get the response that:
>
> Address 10.0.0.72 is not valid for it's associated network

You can try changing the last bit of your subnet address to 0 and test
it again..

Regards,
Saurav..
Goto Forum:
  


Current Time: Thu Sep 21 08:13:29 EDT 2017

Total time taken to generate the page: 0.03093 seconds
.:: Contact :: Home ::Sitemap::.

Powered by: FUDforum 3.0.0RC2.
Copyright ©2001-2009 FUDforum Bulletin Board Software