Forum Search:
Forum.Brain-Cluster.com: Brain Cluster Technical Forum
Ultimate forum for Technical Discussions

Home » Microsoft » Windows Server » Active Directory » Hi Bobson
Hi Bobson [message #407238] Mon, 08 March 2010 04:31 Go to next message
Gomathi Ram  is currently offline Gomathi Ram  United States
Messages: 1
Registered: March 2010
Junior Member
Answer for question:1
Any DC can be choosen as bridgehead server on which any FSMO rules shouldnot be enabled. Also it not manditary that the server is GC.



Bobso wrote:

Some questions on FSMO and AD BridgeHead transfer...
18-Apr-07

Hi everyone,

Thank you for your help in advance...

My questions are:

1.) Any DCs in a site can be chosen a bridgehead server? It does not have to
be GC, holding FSMO roles (in the main site)...?

2.) I would like to transfer all the FSMO roles from one old DC to a new
one. But the old one also a bridgehead server... Does it matter which one I
should do, do the Bridgehead transfer first, or the FSMO roles first? Or does
not matter?

3.) When I do the FSMO transfer, when should I do it? Do it during the off
hours? I have run DCDiag on all the DCs seem fine... But would that be any
unexpected problems by the FSMO transfer?

Hope you can help!

Thank you very much.

Bobson

Previous Posts In This Thread:

On Wednesday, April 18, 2007 12:56 PM
Bobso wrote:

Some questions on FSMO and AD BridgeHead transfer...
Hi everyone,

Thank you for your help in advance...

My questions are:

1.) Any DCs in a site can be chosen a bridgehead server? It does not have to
be GC, holding FSMO roles (in the main site)...?

2.) I would like to transfer all the FSMO roles from one old DC to a new
one. But the old one also a bridgehead server... Does it matter which one I
should do, do the Bridgehead transfer first, or the FSMO roles first? Or does
not matter?

3.) When I do the FSMO transfer, when should I do it? Do it during the off
hours? I have run DCDiag on all the DCs seem fine... But would that be any
unexpected problems by the FSMO transfer?

Hope you can help!

Thank you very much.

Bobson

On Wednesday, April 18, 2007 1:13 PM
Herb Martin wrote:

Re: Some questions on FSMO and AD BridgeHead transfer...
"Bobson" <Bobson@discussions.microsoft.com> wrote in message
news:E9AC0EFA-8835-40E5-99B4-CD66946C8BDE@microsoft.com...

Technically yes, but the GCs are favored -- GC set up a Forest wide (little
known
but) parallel replication architecture to the Domain DCs. Therefore since
GCs
have to replicate they are favored as DCs.

In a single domain forest, every GC should be a DC anyway.


Go ahead. Bridgehead servers are independent of the FSMO, and would
be re-selected even were that not the case.


Leave the bridgehead servers alone -- as long as you haven't already made
the (likely mistaken) selection of them manually.


Only if you are picking your Bridgehead servers manually which is usually
a mistake UNLESS you have a SPECIFIC reason for doing this. (Usually
"firewall" filters are the only real world reason but some exams do use
"load distriction" or performance as artificial reason.)


No. Doing the DCDiag first (to ensure you have no problems first) is the
right
idea.

Do the DCDiag and if you find no FAIL or WARN errors on ANY DC then
do the TRANSFER.

Do another DCDiag test after replication has a chance to complete.

The reason for the initial DCDiag is that if you have failing replication
then some
of the DCs will not be told about the transfer.

--
Herb Martin, MCSE, MVP
http://www.LearnQuick.Com
(phone on web site)

On Wednesday, April 18, 2007 2:02 PM
Bobso wrote:

Hi Herb Martin,Thank you for your response (again)!
Hi Herb Martin,

Thank you for your response (again)!

Something I may still want to be clear... I would like to demote the old
DC... Does it mean the bridgehead server would be re-elected? Or can I do it
manually (hope you do not mind if need to repeat your answer) ?

Let's say, a new bridgeheard server kick in.. .does it mean all the site
links would automatically point to the new bridgehead? Usually how long does
it take?

You may remember I ask some similar question before... After couple weeks to
finish all the setting changes on routers, servers, workstations (static
IP)... I think I can move onto those tasks sounded "risky" like transfering
FSMO, bridgehead, DNS Zone, and finally demotion of the old one.

Thank you very much for your help!

Bobson



"Herb Martin" wrote:

On Wednesday, April 18, 2007 2:25 PM
Herb Martin wrote:

Re: Some questions on FSMO and AD BridgeHead transfer...
"Bobson" <Bobson@discussions.microsoft.com> wrote in message
news:F6C954E7-48D4-4983-8423-8A2B0F9AE47E@microsoft.com...

Yes the bridgehead server will be reselected unless you manual took
charge of that feature.


No, you cannot do it manually UNLESS you retain responsibility for
picking bridgehead servers when one goes down.

Let the KCC to it's job and pick these automatically.


Yes, (to what you mean) but technically you didn't use the right terms.

The SiteLinks are between SITES -- Connections are set up by the KCC
(along the SiteLinks) between the DCs that the KCC also choses for the
Bridgehead server.

So it means: The Connections between BridgeHead servers would automatically
be recreated by the KCC.


5 minutes usually. The KCC runs frequently to check/recheck the replication
topology.


Not very


Best left to the KCC UNLES you have a specific reason and know what you
are doing.


MUST be correctly configured but takes about 5 minutes to do and is very
easy.


As long as you have the NEW DC and the DCDiag is clean this is no big
deal.

You SHOULD transfer the roles yourself (so you can pick the transferred
DC to receive the roles) but even this is not technically necessary when you
have a clean DCDiag on all DCs. Transfer WILL be automatic IF that is
possible.


Sure. You are welcome.

Pass on the help to others and recommend me to your friends.

--
Herb Martin, MCSE, MVP
http://www.LearnQuick.Com
(phone on web site)

On Wednesday, April 18, 2007 3:36 PM
Bobso wrote:

Ok... I will listen to you on the Bridgehead server task.
Ok... I will listen to you on the Bridgehead server task.

For the FSMO roles I do not even have to transfer the roles from the old one
first before demoting it? Those will transfer to another server
automatically??

Thank you again!

Bobson


"Herb Martin" wrote:

On Wednesday, April 18, 2007 3:40 PM
Jorge Silva wrote:

Re: Some questions on FSMO and AD BridgeHead transfer...
Hi Bobson
Please see answers inline:

Bridgehead servers should be GCs, especially in you have different domains
on your forest.To facilitate intersite replication of global catalog server
updates, Active Directory replication selects global catalog servers as
bridgehead servers whenever a global catalog server is present in a site and
domains that are not present in the site exist in other sites in the forest.
BH Servers don't need to be FSMO roles owners.

Isn't relevant, because assuming that you're leaving the KCC select the BH
Server for at some given time that server migh by selected as BH Server.
However you should have a look at some considerations regarding to FSMO
placement (At least the Infrastructure Master placement on GCs) especially
if you have a Multidomain environmen scenario.
http://support.microsoft.com/kb/223346

The process is quick unless your using very slow WAN links, also note that
you should wait for replication accross all Existing DCs, or you can force
that replication to speedup the process.

--
I hope that the information above helps you.
Have a Nice day.

Jorge Silva
MCSE, MVP Directory Services

--------------------------------------------------

"Bobson" <Bobson@discussions.microsoft.com> wrote in message
news:E9AC0EFA-8835-40E5-99B4-CD66946C8BDE@microsoft.com...

On Wednesday, April 18, 2007 3:41 PM
Herb Martin wrote:

Re: Some questions on FSMO and AD BridgeHead transfer...
Yes, but I am RECOMMENDING STRONGLY that you do the transfer yourself.

Then you know that it both happened AND where the roles ended up.

On Wednesday, April 18, 2007 5:26 PM
Bobso wrote:

Re: Some questions on FSMO and AD BridgeHead transfer...
Thank you very much for all your help!! I really appreciate!

"Jorge Silva" wrote:


Submitted via EggHeadCafe - Software Developer Portal of Choice
Get Started with SQLite and Visual Studio
http://www.eggheadcafe.com/tutorials/aspnet/20f7912e-6fa7-40 eb-b31b-b6f46d4f2c6a/get-started-with-sqlite-a.aspx
Re: Hi Bobson [message #407244 is a reply to message #407238] Mon, 08 March 2010 04:44 Go to previous messageGo to next message
meiweb  is currently offline meiweb  Germany
Messages: 2225
Registered: September 2009
Senior Member
Hello Gomathi,

Are you aware that you are replying to a posting from 18-Apr-07?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> Answer for question:1
> Any DC can be choosen as bridgehead server on which any FSMO rules
> shouldnot be enabled. Also it not manditary that the server is GC.
> Bobso wrote:
>
> Some questions on FSMO and AD BridgeHead transfer... 18-Apr-07
>
> Hi everyone,
>
> Thank you for your help in advance...
>
> My questions are:
>
> 1.) Any DCs in a site can be chosen a bridgehead server? It does not
> have to be GC, holding FSMO roles (in the main site)...?
>
> 2.) I would like to transfer all the FSMO roles from one old DC to a
> new one. But the old one also a bridgehead server... Does it matter
> which one I should do, do the Bridgehead transfer first, or the FSMO
> roles first? Or does not matter?
>
> 3.) When I do the FSMO transfer, when should I do it? Do it during the
> off hours? I have run DCDiag on all the DCs seem fine... But would
> that be any unexpected problems by the FSMO transfer?
>
> Hope you can help!
>
> Thank you very much.
>
> Bobson
>
> Previous Posts In This Thread:
>
> On Wednesday, April 18, 2007 12:56 PM
> Bobso wrote:
> Some questions on FSMO and AD BridgeHead transfer... Hi everyone,
>
> Thank you for your help in advance...
>
> My questions are:
>
> 1.) Any DCs in a site can be chosen a bridgehead server? It does not
> have to be GC, holding FSMO roles (in the main site)...?
>
> 2.) I would like to transfer all the FSMO roles from one old DC to a
> new one. But the old one also a bridgehead server... Does it matter
> which one I should do, do the Bridgehead transfer first, or the FSMO
> roles first? Or does not matter?
>
> 3.) When I do the FSMO transfer, when should I do it? Do it during the
> off hours? I have run DCDiag on all the DCs seem fine... But would
> that be any unexpected problems by the FSMO transfer?
>
> Hope you can help!
>
> Thank you very much.
>
> Bobson
>
> On Wednesday, April 18, 2007 1:13 PM
> Herb Martin wrote:
> Re: Some questions on FSMO and AD BridgeHead transfer... "Bobson"
> <Bobson@discussions.microsoft.com> wrote in message
> news:E9AC0EFA-8835-40E5-99B4-CD66946C8BDE@microsoft.com...
>
> Technically yes, but the GCs are favored -- GC set up a Forest wide
> (little
> known
> but) parallel replication architecture to the Domain DCs. Therefore
> since
> GCs
> have to replicate they are favored as DCs.
> In a single domain forest, every GC should be a DC anyway.
>
> Go ahead. Bridgehead servers are independent of the FSMO, and would
> be re-selected even were that not the case.
>
> Leave the bridgehead servers alone -- as long as you haven't already
> made the (likely mistaken) selection of them manually.
>
> Only if you are picking your Bridgehead servers manually which is
> usually a mistake UNLESS you have a SPECIFIC reason for doing this.
> (Usually "firewall" filters are the only real world reason but some
> exams do use "load distriction" or performance as artificial reason.)
>
> No. Doing the DCDiag first (to ensure you have no problems first) is
> the
> right
> idea.
> Do the DCDiag and if you find no FAIL or WARN errors on ANY DC then do
> the TRANSFER.
>
> Do another DCDiag test after replication has a chance to complete.
>
> The reason for the initial DCDiag is that if you have failing
> replication
> then some
> of the DCs will not be told about the transfer.
> On Wednesday, April 18, 2007 2:02 PM
> Bobso wrote:
> Hi Herb Martin,Thank you for your response (again)! Hi Herb Martin,
>
> Thank you for your response (again)!
>
> Something I may still want to be clear... I would like to demote the
> old DC... Does it mean the bridgehead server would be re-elected? Or
> can I do it manually (hope you do not mind if need to repeat your
> answer) ?
>
> Let's say, a new bridgeheard server kick in.. .does it mean all the
> site links would automatically point to the new bridgehead? Usually
> how long does it take?
>
> You may remember I ask some similar question before... After couple
> weeks to finish all the setting changes on routers, servers,
> workstations (static IP)... I think I can move onto those tasks
> sounded "risky" like transfering FSMO, bridgehead, DNS Zone, and
> finally demotion of the old one.
>
> Thank you very much for your help!
>
> Bobson
>
> "Herb Martin" wrote:
>
> On Wednesday, April 18, 2007 2:25 PM
> Herb Martin wrote:
> Re: Some questions on FSMO and AD BridgeHead transfer... "Bobson"
> <Bobson@discussions.microsoft.com> wrote in message
> news:F6C954E7-48D4-4983-8423-8A2B0F9AE47E@microsoft.com...
>
> Yes the bridgehead server will be reselected unless you manual took
> charge of that feature.
>
> No, you cannot do it manually UNLESS you retain responsibility for
> picking bridgehead servers when one goes down.
>
> Let the KCC to it's job and pick these automatically.
>
> Yes, (to what you mean) but technically you didn't use the right
> terms.
>
> The SiteLinks are between SITES -- Connections are set up by the KCC
> (along the SiteLinks) between the DCs that the KCC also choses for the
> Bridgehead server.
>
> So it means: The Connections between BridgeHead servers would
> automatically be recreated by the KCC.
>
> 5 minutes usually. The KCC runs frequently to check/recheck the
> replication topology.
>
> Not very
>
> Best left to the KCC UNLES you have a specific reason and know what
> you are doing.
>
> MUST be correctly configured but takes about 5 minutes to do and is
> very easy.
>
> As long as you have the NEW DC and the DCDiag is clean this is no big
> deal.
>
> You SHOULD transfer the roles yourself (so you can pick the
> transferred
> DC to receive the roles) but even this is not technically necessary
> when you
> have a clean DCDiag on all DCs. Transfer WILL be automatic IF that is
> possible.
> Sure. You are welcome.
>
> Pass on the help to others and recommend me to your friends.
>
> On Wednesday, April 18, 2007 3:36 PM
> Bobso wrote:
> Ok... I will listen to you on the Bridgehead server task. Ok... I
> will listen to you on the Bridgehead server task.
>
> For the FSMO roles I do not even have to transfer the roles from the
> old one first before demoting it? Those will transfer to another
> server automatically??
>
> Thank you again!
>
> Bobson
>
> "Herb Martin" wrote:
>
> On Wednesday, April 18, 2007 3:40 PM
> Jorge Silva wrote:
> Re: Some questions on FSMO and AD BridgeHead transfer...
> Hi Bobson
> Please see answers inline:
> Bridgehead servers should be GCs, especially in you have different
> domains on your forest.To facilitate intersite replication of global
> catalog server updates, Active Directory replication selects global
> catalog servers as bridgehead servers whenever a global catalog server
> is present in a site and domains that are not present in the site
> exist in other sites in the forest. BH Servers don't need to be FSMO
> roles owners.
>
> Isn't relevant, because assuming that you're leaving the KCC select
> the BH Server for at some given time that server migh by selected as
> BH Server. However you should have a look at some considerations
> regarding to FSMO placement (At least the Infrastructure Master
> placement on GCs) especially if you have a Multidomain environmen
> scenario. http://support.microsoft.com/kb/223346
>
> The process is quick unless your using very slow WAN links, also note
> that you should wait for replication accross all Existing DCs, or you
> can force that replication to speedup the process.
>
> Jorge Silva
> MCSE, MVP Directory Services
> --------------------------------------------------
>
> "Bobson" <Bobson@discussions.microsoft.com> wrote in message
> news:E9AC0EFA-8835-40E5-99B4-CD66946C8BDE@microsoft.com...
>
> On Wednesday, April 18, 2007 3:41 PM
> Herb Martin wrote:
> Re: Some questions on FSMO and AD BridgeHead transfer... Yes, but I am
> RECOMMENDING STRONGLY that you do the transfer yourself.
>
> Then you know that it both happened AND where the roles ended up.
>
> On Wednesday, April 18, 2007 5:26 PM
> Bobso wrote:
> Re: Some questions on FSMO and AD BridgeHead transfer... Thank you
> very much for all your help!! I really appreciate!
>
> "Jorge Silva" wrote:
>
> Submitted via EggHeadCafe - Software Developer Portal of Choice
>
> Get Started with SQLite and Visual Studio
>
> http://www.eggheadcafe.com/tutorials/aspnet/20f7912e-6fa7-40 eb-b31b-b6
> f46d4f2c6a/get-started-with-sqlite-a.aspx
>
Re: Hi Bobson [message #407287 is a reply to message #407244] Mon, 08 March 2010 06:26 Go to previous messageGo to next message
pbbergs  is currently offline pbbergs  United States
Messages: 1024
Registered: July 2009
Senior Member
That is going back aways. :-)

--
Paul Bergson
MVP - Directory Services
MCITP - Enterprise Administrator
MCTS, MCT, MCSE, MCSA, MCP, Security +, BS CSci
2008, Vista, 2003, 2000 (Early Achiever), NT4
Microsoft's Thrive IT Pro of the Month - June 2009

http://www.pbbergs.com

Please no e-mails, any questions should be posted in the NewGroups. This
posting is provided "AS IS" with no warranties and confers no rights.
"Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message
news:6cb2911de4ba8cc8cd447def37e@msnews.microsoft.com...
> Hello Gomathi,
>
> Are you aware that you are replying to a posting from 18-Apr-07?
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>
> > Answer for question:1
> > Any DC can be choosen as bridgehead server on which any FSMO rules
> > shouldnot be enabled. Also it not manditary that the server is GC.
> > Bobso wrote:
> >
> > Some questions on FSMO and AD BridgeHead transfer... 18-Apr-07
> >
> > Hi everyone,
> >
> > Thank you for your help in advance...
> >
> > My questions are:
> >
> > 1.) Any DCs in a site can be chosen a bridgehead server? It does not
> > have to be GC, holding FSMO roles (in the main site)...?
> >
> > 2.) I would like to transfer all the FSMO roles from one old DC to a
> > new one. But the old one also a bridgehead server... Does it matter
> > which one I should do, do the Bridgehead transfer first, or the FSMO
> > roles first? Or does not matter?
> >
> > 3.) When I do the FSMO transfer, when should I do it? Do it during the
> > off hours? I have run DCDiag on all the DCs seem fine... But would
> > that be any unexpected problems by the FSMO transfer?
> >
> > Hope you can help!
> >
> > Thank you very much.
> >
> > Bobson
> >
> > Previous Posts In This Thread:
> >
> > On Wednesday, April 18, 2007 12:56 PM
> > Bobso wrote:
> > Some questions on FSMO and AD BridgeHead transfer... Hi everyone,
> >
> > Thank you for your help in advance...
> >
> > My questions are:
> >
> > 1.) Any DCs in a site can be chosen a bridgehead server? It does not
> > have to be GC, holding FSMO roles (in the main site)...?
> >
> > 2.) I would like to transfer all the FSMO roles from one old DC to a
> > new one. But the old one also a bridgehead server... Does it matter
> > which one I should do, do the Bridgehead transfer first, or the FSMO
> > roles first? Or does not matter?
> >
> > 3.) When I do the FSMO transfer, when should I do it? Do it during the
> > off hours? I have run DCDiag on all the DCs seem fine... But would
> > that be any unexpected problems by the FSMO transfer?
> >
> > Hope you can help!
> >
> > Thank you very much.
> >
> > Bobson
> >
> > On Wednesday, April 18, 2007 1:13 PM
> > Herb Martin wrote:
> > Re: Some questions on FSMO and AD BridgeHead transfer... "Bobson"
> > <Bobson@discussions.microsoft.com> wrote in message
> > news:E9AC0EFA-8835-40E5-99B4-CD66946C8BDE@microsoft.com...
> >
> > Technically yes, but the GCs are favored -- GC set up a Forest wide
> > (little
> > known
> > but) parallel replication architecture to the Domain DCs. Therefore
> > since
> > GCs
> > have to replicate they are favored as DCs.
> > In a single domain forest, every GC should be a DC anyway.
> >
> > Go ahead. Bridgehead servers are independent of the FSMO, and would
> > be re-selected even were that not the case.
> >
> > Leave the bridgehead servers alone -- as long as you haven't already
> > made the (likely mistaken) selection of them manually.
> >
> > Only if you are picking your Bridgehead servers manually which is
> > usually a mistake UNLESS you have a SPECIFIC reason for doing this.
> > (Usually "firewall" filters are the only real world reason but some
> > exams do use "load distriction" or performance as artificial reason.)
> >
> > No. Doing the DCDiag first (to ensure you have no problems first) is
> > the
> > right
> > idea.
> > Do the DCDiag and if you find no FAIL or WARN errors on ANY DC then do
> > the TRANSFER.
> >
> > Do another DCDiag test after replication has a chance to complete.
> >
> > The reason for the initial DCDiag is that if you have failing
> > replication
> > then some
> > of the DCs will not be told about the transfer.
> > On Wednesday, April 18, 2007 2:02 PM
> > Bobso wrote:
> > Hi Herb Martin,Thank you for your response (again)! Hi Herb Martin,
> >
> > Thank you for your response (again)!
> >
> > Something I may still want to be clear... I would like to demote the
> > old DC... Does it mean the bridgehead server would be re-elected? Or
> > can I do it manually (hope you do not mind if need to repeat your
> > answer) ?
> >
> > Let's say, a new bridgeheard server kick in.. .does it mean all the
> > site links would automatically point to the new bridgehead? Usually
> > how long does it take?
> >
> > You may remember I ask some similar question before... After couple
> > weeks to finish all the setting changes on routers, servers,
> > workstations (static IP)... I think I can move onto those tasks
> > sounded "risky" like transfering FSMO, bridgehead, DNS Zone, and
> > finally demotion of the old one.
> >
> > Thank you very much for your help!
> >
> > Bobson
> >
> > "Herb Martin" wrote:
> >
> > On Wednesday, April 18, 2007 2:25 PM
> > Herb Martin wrote:
> > Re: Some questions on FSMO and AD BridgeHead transfer... "Bobson"
> > <Bobson@discussions.microsoft.com> wrote in message
> > news:F6C954E7-48D4-4983-8423-8A2B0F9AE47E@microsoft.com...
> >
> > Yes the bridgehead server will be reselected unless you manual took
> > charge of that feature.
> >
> > No, you cannot do it manually UNLESS you retain responsibility for
> > picking bridgehead servers when one goes down.
> >
> > Let the KCC to it's job and pick these automatically.
> >
> > Yes, (to what you mean) but technically you didn't use the right
> > terms.
> >
> > The SiteLinks are between SITES -- Connections are set up by the KCC
> > (along the SiteLinks) between the DCs that the KCC also choses for the
> > Bridgehead server.
> >
> > So it means: The Connections between BridgeHead servers would
> > automatically be recreated by the KCC.
> >
> > 5 minutes usually. The KCC runs frequently to check/recheck the
> > replication topology.
> >
> > Not very
> >
> > Best left to the KCC UNLES you have a specific reason and know what
> > you are doing.
> >
> > MUST be correctly configured but takes about 5 minutes to do and is
> > very easy.
> >
> > As long as you have the NEW DC and the DCDiag is clean this is no big
> > deal.
> >
> > You SHOULD transfer the roles yourself (so you can pick the
> > transferred
> > DC to receive the roles) but even this is not technically necessary
> > when you
> > have a clean DCDiag on all DCs. Transfer WILL be automatic IF that is
> > possible.
> > Sure. You are welcome.
> >
> > Pass on the help to others and recommend me to your friends.
> >
> > On Wednesday, April 18, 2007 3:36 PM
> > Bobso wrote:
> > Ok... I will listen to you on the Bridgehead server task. Ok... I
> > will listen to you on the Bridgehead server task.
> >
> > For the FSMO roles I do not even have to transfer the roles from the
> > old one first before demoting it? Those will transfer to another
> > server automatically??
> >
> > Thank you again!
> >
> > Bobson
> >
> > "Herb Martin" wrote:
> >
> > On Wednesday, April 18, 2007 3:40 PM
> > Jorge Silva wrote:
> > Re: Some questions on FSMO and AD BridgeHead transfer...
> > Hi Bobson
> > Please see answers inline:
> > Bridgehead servers should be GCs, especially in you have different
> > domains on your forest.To facilitate intersite replication of global
> > catalog server updates, Active Directory replication selects global
> > catalog servers as bridgehead servers whenever a global catalog server
> > is present in a site and domains that are not present in the site
> > exist in other sites in the forest. BH Servers don't need to be FSMO
> > roles owners.
> >
> > Isn't relevant, because assuming that you're leaving the KCC select
> > the BH Server for at some given time that server migh by selected as
> > BH Server. However you should have a look at some considerations
> > regarding to FSMO placement (At least the Infrastructure Master
> > placement on GCs) especially if you have a Multidomain environmen
> > scenario. http://support.microsoft.com/kb/223346
> >
> > The process is quick unless your using very slow WAN links, also note
> > that you should wait for replication accross all Existing DCs, or you
> > can force that replication to speedup the process.
> >
> > Jorge Silva
> > MCSE, MVP Directory Services
> > --------------------------------------------------
> >
> > "Bobson" <Bobson@discussions.microsoft.com> wrote in message
> > news:E9AC0EFA-8835-40E5-99B4-CD66946C8BDE@microsoft.com...
> >
> > On Wednesday, April 18, 2007 3:41 PM
> > Herb Martin wrote:
> > Re: Some questions on FSMO and AD BridgeHead transfer... Yes, but I am
> > RECOMMENDING STRONGLY that you do the transfer yourself.
> >
> > Then you know that it both happened AND where the roles ended up.
> >
> > On Wednesday, April 18, 2007 5:26 PM
> > Bobso wrote:
> > Re: Some questions on FSMO and AD BridgeHead transfer... Thank you
> > very much for all your help!! I really appreciate!
> >
> > "Jorge Silva" wrote:
> >
> > Submitted via EggHeadCafe - Software Developer Portal of Choice
> >
> > Get Started with SQLite and Visual Studio
> >
> > http://www.eggheadcafe.com/tutorials/aspnet/20f7912e-6fa7-40 eb-b31b-b6
> > f46d4f2c6a/get-started-with-sqlite-a.aspx
> >
>
>
Re: Hi Bobson [message #407308 is a reply to message #407287] Mon, 08 March 2010 06:51 Go to previous messageGo to next message
aceman  is currently offline aceman  United States
Messages: 5816
Registered: July 2009
Senior Member
"Paul Bergson [MVP-DS]" <pbbergs@no-spam.msn.com> wrote in message news:O3N1zLsvKHA.732@TK2MSFTNGP06.phx.gbl...

I would assume the original poster, Bobson, probably fixed this by now.


--
Ace

This posting is provided "AS-IS" with no warranties or guarantees and confers no rights.

Please reply back to the newsgroup or forum for collaboration benefit among responding engineers, and to help others benefit from your resolution.

Ace Fekay, MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services

If you feel this is an urgent issue and require immediate assistance, please contact Microsoft PSS directly. Please check http://support.microsoft.com for regional support phone numbers.

> That is going back aways. :-)
>
> --
> Paul Bergson
> MVP - Directory Services
> MCITP - Enterprise Administrator
> MCTS, MCT, MCSE, MCSA, MCP, Security +, BS CSci
> 2008, Vista, 2003, 2000 (Early Achiever), NT4
> Microsoft's Thrive IT Pro of the Month - June 2009
>
> http://www.pbbergs.com
>
> Please no e-mails, any questions should be posted in the NewGroups. This
> posting is provided "AS IS" with no warranties and confers no rights.
> "Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message
> news:6cb2911de4ba8cc8cd447def37e@msnews.microsoft.com...
>> Hello Gomathi,
>>
>> Are you aware that you are replying to a posting from 18-Apr-07?
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers
>> no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>
>>
>> > Answer for question:1
>> > Any DC can be choosen as bridgehead server on which any FSMO rules
>> > shouldnot be enabled. Also it not manditary that the server is GC.
>> > Bobso wrote:
>> >
>> > Some questions on FSMO and AD BridgeHead transfer... 18-Apr-07
>> >
>> > Hi everyone,
>> >
>> > Thank you for your help in advance...
>> >
>> > My questions are:
>> >
>> > 1.) Any DCs in a site can be chosen a bridgehead server? It does not
>> > have to be GC, holding FSMO roles (in the main site)...?
>> >
>> > 2.) I would like to transfer all the FSMO roles from one old DC to a
>> > new one. But the old one also a bridgehead server... Does it matter
>> > which one I should do, do the Bridgehead transfer first, or the FSMO
>> > roles first? Or does not matter?
>> >
>> > 3.) When I do the FSMO transfer, when should I do it? Do it during the
>> > off hours? I have run DCDiag on all the DCs seem fine... But would
>> > that be any unexpected problems by the FSMO transfer?
>> >
>> > Hope you can help!
>> >
>> > Thank you very much.
>> >
>> > Bobson
>> >
>> > Previous Posts In This Thread:
>> >
>> > On Wednesday, April 18, 2007 12:56 PM
>> > Bobso wrote:
>> > Some questions on FSMO and AD BridgeHead transfer... Hi everyone,
>> >
>> > Thank you for your help in advance...
>> >
>> > My questions are:
>> >
>> > 1.) Any DCs in a site can be chosen a bridgehead server? It does not
>> > have to be GC, holding FSMO roles (in the main site)...?
>> >
>> > 2.) I would like to transfer all the FSMO roles from one old DC to a
>> > new one. But the old one also a bridgehead server... Does it matter
>> > which one I should do, do the Bridgehead transfer first, or the FSMO
>> > roles first? Or does not matter?
>> >
>> > 3.) When I do the FSMO transfer, when should I do it? Do it during the
>> > off hours? I have run DCDiag on all the DCs seem fine... But would
>> > that be any unexpected problems by the FSMO transfer?
>> >
>> > Hope you can help!
>> >
>> > Thank you very much.
>> >
>> > Bobson
>> >
>> > On Wednesday, April 18, 2007 1:13 PM
>> > Herb Martin wrote:
>> > Re: Some questions on FSMO and AD BridgeHead transfer... "Bobson"
>> > <Bobson@discussions.microsoft.com> wrote in message
>> > news:E9AC0EFA-8835-40E5-99B4-CD66946C8BDE@microsoft.com...
>> >
>> > Technically yes, but the GCs are favored -- GC set up a Forest wide
>> > (little
>> > known
>> > but) parallel replication architecture to the Domain DCs. Therefore
>> > since
>> > GCs
>> > have to replicate they are favored as DCs.
>> > In a single domain forest, every GC should be a DC anyway.
>> >
>> > Go ahead. Bridgehead servers are independent of the FSMO, and would
>> > be re-selected even were that not the case.
>> >
>> > Leave the bridgehead servers alone -- as long as you haven't already
>> > made the (likely mistaken) selection of them manually.
>> >
>> > Only if you are picking your Bridgehead servers manually which is
>> > usually a mistake UNLESS you have a SPECIFIC reason for doing this.
>> > (Usually "firewall" filters are the only real world reason but some
>> > exams do use "load distriction" or performance as artificial reason.)
>> >
>> > No. Doing the DCDiag first (to ensure you have no problems first) is
>> > the
>> > right
>> > idea.
>> > Do the DCDiag and if you find no FAIL or WARN errors on ANY DC then do
>> > the TRANSFER.
>> >
>> > Do another DCDiag test after replication has a chance to complete.
>> >
>> > The reason for the initial DCDiag is that if you have failing
>> > replication
>> > then some
>> > of the DCs will not be told about the transfer.
>> > On Wednesday, April 18, 2007 2:02 PM
>> > Bobso wrote:
>> > Hi Herb Martin,Thank you for your response (again)! Hi Herb Martin,
>> >
>> > Thank you for your response (again)!
>> >
>> > Something I may still want to be clear... I would like to demote the
>> > old DC... Does it mean the bridgehead server would be re-elected? Or
>> > can I do it manually (hope you do not mind if need to repeat your
>> > answer) ?
>> >
>> > Let's say, a new bridgeheard server kick in.. .does it mean all the
>> > site links would automatically point to the new bridgehead? Usually
>> > how long does it take?
>> >
>> > You may remember I ask some similar question before... After couple
>> > weeks to finish all the setting changes on routers, servers,
>> > workstations (static IP)... I think I can move onto those tasks
>> > sounded "risky" like transfering FSMO, bridgehead, DNS Zone, and
>> > finally demotion of the old one.
>> >
>> > Thank you very much for your help!
>> >
>> > Bobson
>> >
>> > "Herb Martin" wrote:
>> >
>> > On Wednesday, April 18, 2007 2:25 PM
>> > Herb Martin wrote:
>> > Re: Some questions on FSMO and AD BridgeHead transfer... "Bobson"
>> > <Bobson@discussions.microsoft.com> wrote in message
>> > news:F6C954E7-48D4-4983-8423-8A2B0F9AE47E@microsoft.com...
>> >
>> > Yes the bridgehead server will be reselected unless you manual took
>> > charge of that feature.
>> >
>> > No, you cannot do it manually UNLESS you retain responsibility for
>> > picking bridgehead servers when one goes down.
>> >
>> > Let the KCC to it's job and pick these automatically.
>> >
>> > Yes, (to what you mean) but technically you didn't use the right
>> > terms.
>> >
>> > The SiteLinks are between SITES -- Connections are set up by the KCC
>> > (along the SiteLinks) between the DCs that the KCC also choses for the
>> > Bridgehead server.
>> >
>> > So it means: The Connections between BridgeHead servers would
>> > automatically be recreated by the KCC.
>> >
>> > 5 minutes usually. The KCC runs frequently to check/recheck the
>> > replication topology.
>> >
>> > Not very
>> >
>> > Best left to the KCC UNLES you have a specific reason and know what
>> > you are doing.
>> >
>> > MUST be correctly configured but takes about 5 minutes to do and is
>> > very easy.
>> >
>> > As long as you have the NEW DC and the DCDiag is clean this is no big
>> > deal.
>> >
>> > You SHOULD transfer the roles yourself (so you can pick the
>> > transferred
>> > DC to receive the roles) but even this is not technically necessary
>> > when you
>> > have a clean DCDiag on all DCs. Transfer WILL be automatic IF that is
>> > possible.
>> > Sure. You are welcome.
>> >
>> > Pass on the help to others and recommend me to your friends.
>> >
>> > On Wednesday, April 18, 2007 3:36 PM
>> > Bobso wrote:
>> > Ok... I will listen to you on the Bridgehead server task. Ok... I
>> > will listen to you on the Bridgehead server task.
>> >
>> > For the FSMO roles I do not even have to transfer the roles from the
>> > old one first before demoting it? Those will transfer to another
>> > server automatically??
>> >
>> > Thank you again!
>> >
>> > Bobson
>> >
>> > "Herb Martin" wrote:
>> >
>> > On Wednesday, April 18, 2007 3:40 PM
>> > Jorge Silva wrote:
>> > Re: Some questions on FSMO and AD BridgeHead transfer...
>> > Hi Bobson
>> > Please see answers inline:
>> > Bridgehead servers should be GCs, especially in you have different
>> > domains on your forest.To facilitate intersite replication of global
>> > catalog server updates, Active Directory replication selects global
>> > catalog servers as bridgehead servers whenever a global catalog server
>> > is present in a site and domains that are not present in the site
>> > exist in other sites in the forest. BH Servers don't need to be FSMO
>> > roles owners.
>> >
>> > Isn't relevant, because assuming that you're leaving the KCC select
>> > the BH Server for at some given time that server migh by selected as
>> > BH Server. However you should have a look at some considerations
>> > regarding to FSMO placement (At least the Infrastructure Master
>> > placement on GCs) especially if you have a Multidomain environmen
>> > scenario. http://support.microsoft.com/kb/223346
>> >
>> > The process is quick unless your using very slow WAN links, also note
>> > that you should wait for replication accross all Existing DCs, or you
>> > can force that replication to speedup the process.
>> >
>> > Jorge Silva
>> > MCSE, MVP Directory Services
>> > --------------------------------------------------
>> >
>> > "Bobson" <Bobson@discussions.microsoft.com> wrote in message
>> > news:E9AC0EFA-8835-40E5-99B4-CD66946C8BDE@microsoft.com...
>> >
>> > On Wednesday, April 18, 2007 3:41 PM
>> > Herb Martin wrote:
>> > Re: Some questions on FSMO and AD BridgeHead transfer... Yes, but I am
>> > RECOMMENDING STRONGLY that you do the transfer yourself.
>> >
>> > Then you know that it both happened AND where the roles ended up.
>> >
>> > On Wednesday, April 18, 2007 5:26 PM
>> > Bobso wrote:
>> > Re: Some questions on FSMO and AD BridgeHead transfer... Thank you
>> > very much for all your help!! I really appreciate!
>> >
>> > "Jorge Silva" wrote:
>> >
>> > Submitted via EggHeadCafe - Software Developer Portal of Choice
>> >
>> > Get Started with SQLite and Visual Studio
>> >
>> > http://www.eggheadcafe.com/tutorials/aspnet/20f7912e-6fa7-40 eb-b31b-b6
>> > f46d4f2c6a/get-started-with-sqlite-a.aspx
>> >
>>
>>
>
>
Re: Hi Bobson [message #407329 is a reply to message #407308] Mon, 08 March 2010 07:26 Go to previous message
pbbergs  is currently offline pbbergs  United States
Messages: 1024
Registered: July 2009
Senior Member
Would hope so. :-)

--
Paul Bergson
MVP - Directory Services
MCITP - Enterprise Administrator
MCTS, MCT, MCSE, MCSA, MCP, Security +, BS CSci
2008, Vista, 2003, 2000 (Early Achiever), NT4
Microsoft's Thrive IT Pro of the Month - June 2009

http://www.pbbergs.com

Please no e-mails, any questions should be posted in the NewGroups. This
posting is provided "AS IS" with no warranties and confers no rights.
"Ace Fekay [MVP-DS, MCT]" <aceman@mvps.RemoveThisPart.org> wrote in message
news:eKuE0ZsvKHA.4492@TK2MSFTNGP05.phx.gbl...
"Paul Bergson [MVP-DS]" <pbbergs@no-spam.msn.com> wrote in message
news:O3N1zLsvKHA.732@TK2MSFTNGP06.phx.gbl...

I would assume the original poster, Bobson, probably fixed this by now.


--
Ace

This posting is provided "AS-IS" with no warranties or guarantees and
confers no rights.

Please reply back to the newsgroup or forum for collaboration benefit among
responding engineers, and to help others benefit from your resolution.

Ace Fekay, MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007, MCSE &
MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services

If you feel this is an urgent issue and require immediate assistance, please
contact Microsoft PSS directly. Please check http://support.microsoft.com
for regional support phone numbers.

> That is going back aways. :-)
>
> --
> Paul Bergson
> MVP - Directory Services
> MCITP - Enterprise Administrator
> MCTS, MCT, MCSE, MCSA, MCP, Security +, BS CSci
> 2008, Vista, 2003, 2000 (Early Achiever), NT4
> Microsoft's Thrive IT Pro of the Month - June 2009
>
> http://www.pbbergs.com
>
> Please no e-mails, any questions should be posted in the NewGroups. This
> posting is provided "AS IS" with no warranties and confers no rights.
> "Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message
> news:6cb2911de4ba8cc8cd447def37e@msnews.microsoft.com...
>> Hello Gomathi,
>>
>> Are you aware that you are replying to a posting from 18-Apr-07?
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers
>> no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>
>>
>> > Answer for question:1
>> > Any DC can be choosen as bridgehead server on which any FSMO rules
>> > shouldnot be enabled. Also it not manditary that the server is GC.
>> > Bobso wrote:
>> >
>> > Some questions on FSMO and AD BridgeHead transfer... 18-Apr-07
>> >
>> > Hi everyone,
>> >
>> > Thank you for your help in advance...
>> >
>> > My questions are:
>> >
>> > 1.) Any DCs in a site can be chosen a bridgehead server? It does not
>> > have to be GC, holding FSMO roles (in the main site)...?
>> >
>> > 2.) I would like to transfer all the FSMO roles from one old DC to a
>> > new one. But the old one also a bridgehead server... Does it matter
>> > which one I should do, do the Bridgehead transfer first, or the FSMO
>> > roles first? Or does not matter?
>> >
>> > 3.) When I do the FSMO transfer, when should I do it? Do it during the
>> > off hours? I have run DCDiag on all the DCs seem fine... But would
>> > that be any unexpected problems by the FSMO transfer?
>> >
>> > Hope you can help!
>> >
>> > Thank you very much.
>> >
>> > Bobson
>> >
>> > Previous Posts In This Thread:
>> >
>> > On Wednesday, April 18, 2007 12:56 PM
>> > Bobso wrote:
>> > Some questions on FSMO and AD BridgeHead transfer... Hi everyone,
>> >
>> > Thank you for your help in advance...
>> >
>> > My questions are:
>> >
>> > 1.) Any DCs in a site can be chosen a bridgehead server? It does not
>> > have to be GC, holding FSMO roles (in the main site)...?
>> >
>> > 2.) I would like to transfer all the FSMO roles from one old DC to a
>> > new one. But the old one also a bridgehead server... Does it matter
>> > which one I should do, do the Bridgehead transfer first, or the FSMO
>> > roles first? Or does not matter?
>> >
>> > 3.) When I do the FSMO transfer, when should I do it? Do it during the
>> > off hours? I have run DCDiag on all the DCs seem fine... But would
>> > that be any unexpected problems by the FSMO transfer?
>> >
>> > Hope you can help!
>> >
>> > Thank you very much.
>> >
>> > Bobson
>> >
>> > On Wednesday, April 18, 2007 1:13 PM
>> > Herb Martin wrote:
>> > Re: Some questions on FSMO and AD BridgeHead transfer... "Bobson"
>> > <Bobson@discussions.microsoft.com> wrote in message
>> > news:E9AC0EFA-8835-40E5-99B4-CD66946C8BDE@microsoft.com...
>> >
>> > Technically yes, but the GCs are favored -- GC set up a Forest wide
>> > (little
>> > known
>> > but) parallel replication architecture to the Domain DCs. Therefore
>> > since
>> > GCs
>> > have to replicate they are favored as DCs.
>> > In a single domain forest, every GC should be a DC anyway.
>> >
>> > Go ahead. Bridgehead servers are independent of the FSMO, and would
>> > be re-selected even were that not the case.
>> >
>> > Leave the bridgehead servers alone -- as long as you haven't already
>> > made the (likely mistaken) selection of them manually.
>> >
>> > Only if you are picking your Bridgehead servers manually which is
>> > usually a mistake UNLESS you have a SPECIFIC reason for doing this.
>> > (Usually "firewall" filters are the only real world reason but some
>> > exams do use "load distriction" or performance as artificial reason.)
>> >
>> > No. Doing the DCDiag first (to ensure you have no problems first) is
>> > the
>> > right
>> > idea.
>> > Do the DCDiag and if you find no FAIL or WARN errors on ANY DC then do
>> > the TRANSFER.
>> >
>> > Do another DCDiag test after replication has a chance to complete.
>> >
>> > The reason for the initial DCDiag is that if you have failing
>> > replication
>> > then some
>> > of the DCs will not be told about the transfer.
>> > On Wednesday, April 18, 2007 2:02 PM
>> > Bobso wrote:
>> > Hi Herb Martin,Thank you for your response (again)! Hi Herb Martin,
>> >
>> > Thank you for your response (again)!
>> >
>> > Something I may still want to be clear... I would like to demote the
>> > old DC... Does it mean the bridgehead server would be re-elected? Or
>> > can I do it manually (hope you do not mind if need to repeat your
>> > answer) ?
>> >
>> > Let's say, a new bridgeheard server kick in.. .does it mean all the
>> > site links would automatically point to the new bridgehead? Usually
>> > how long does it take?
>> >
>> > You may remember I ask some similar question before... After couple
>> > weeks to finish all the setting changes on routers, servers,
>> > workstations (static IP)... I think I can move onto those tasks
>> > sounded "risky" like transfering FSMO, bridgehead, DNS Zone, and
>> > finally demotion of the old one.
>> >
>> > Thank you very much for your help!
>> >
>> > Bobson
>> >
>> > "Herb Martin" wrote:
>> >
>> > On Wednesday, April 18, 2007 2:25 PM
>> > Herb Martin wrote:
>> > Re: Some questions on FSMO and AD BridgeHead transfer... "Bobson"
>> > <Bobson@discussions.microsoft.com> wrote in message
>> > news:F6C954E7-48D4-4983-8423-8A2B0F9AE47E@microsoft.com...
>> >
>> > Yes the bridgehead server will be reselected unless you manual took
>> > charge of that feature.
>> >
>> > No, you cannot do it manually UNLESS you retain responsibility for
>> > picking bridgehead servers when one goes down.
>> >
>> > Let the KCC to it's job and pick these automatically.
>> >
>> > Yes, (to what you mean) but technically you didn't use the right
>> > terms.
>> >
>> > The SiteLinks are between SITES -- Connections are set up by the KCC
>> > (along the SiteLinks) between the DCs that the KCC also choses for the
>> > Bridgehead server.
>> >
>> > So it means: The Connections between BridgeHead servers would
>> > automatically be recreated by the KCC.
>> >
>> > 5 minutes usually. The KCC runs frequently to check/recheck the
>> > replication topology.
>> >
>> > Not very
>> >
>> > Best left to the KCC UNLES you have a specific reason and know what
>> > you are doing.
>> >
>> > MUST be correctly configured but takes about 5 minutes to do and is
>> > very easy.
>> >
>> > As long as you have the NEW DC and the DCDiag is clean this is no big
>> > deal.
>> >
>> > You SHOULD transfer the roles yourself (so you can pick the
>> > transferred
>> > DC to receive the roles) but even this is not technically necessary
>> > when you
>> > have a clean DCDiag on all DCs. Transfer WILL be automatic IF that is
>> > possible.
>> > Sure. You are welcome.
>> >
>> > Pass on the help to others and recommend me to your friends.
>> >
>> > On Wednesday, April 18, 2007 3:36 PM
>> > Bobso wrote:
>> > Ok... I will listen to you on the Bridgehead server task. Ok... I
>> > will listen to you on the Bridgehead server task.
>> >
>> > For the FSMO roles I do not even have to transfer the roles from the
>> > old one first before demoting it? Those will transfer to another
>> > server automatically??
>> >
>> > Thank you again!
>> >
>> > Bobson
>> >
>> > "Herb Martin" wrote:
>> >
>> > On Wednesday, April 18, 2007 3:40 PM
>> > Jorge Silva wrote:
>> > Re: Some questions on FSMO and AD BridgeHead transfer...
>> > Hi Bobson
>> > Please see answers inline:
>> > Bridgehead servers should be GCs, especially in you have different
>> > domains on your forest.To facilitate intersite replication of global
>> > catalog server updates, Active Directory replication selects global
>> > catalog servers as bridgehead servers whenever a global catalog server
>> > is present in a site and domains that are not present in the site
>> > exist in other sites in the forest. BH Servers don't need to be FSMO
>> > roles owners.
>> >
>> > Isn't relevant, because assuming that you're leaving the KCC select
>> > the BH Server for at some given time that server migh by selected as
>> > BH Server. However you should have a look at some considerations
>> > regarding to FSMO placement (At least the Infrastructure Master
>> > placement on GCs) especially if you have a Multidomain environmen
>> > scenario. http://support.microsoft.com/kb/223346
>> >
>> > The process is quick unless your using very slow WAN links, also note
>> > that you should wait for replication accross all Existing DCs, or you
>> > can force that replication to speedup the process.
>> >
>> > Jorge Silva
>> > MCSE, MVP Directory Services
>> > --------------------------------------------------
>> >
>> > "Bobson" <Bobson@discussions.microsoft.com> wrote in message
>> > news:E9AC0EFA-8835-40E5-99B4-CD66946C8BDE@microsoft.com...
>> >
>> > On Wednesday, April 18, 2007 3:41 PM
>> > Herb Martin wrote:
>> > Re: Some questions on FSMO and AD BridgeHead transfer... Yes, but I am
>> > RECOMMENDING STRONGLY that you do the transfer yourself.
>> >
>> > Then you know that it both happened AND where the roles ended up.
>> >
>> > On Wednesday, April 18, 2007 5:26 PM
>> > Bobso wrote:
>> > Re: Some questions on FSMO and AD BridgeHead transfer... Thank you
>> > very much for all your help!! I really appreciate!
>> >
>> > "Jorge Silva" wrote:
>> >
>> > Submitted via EggHeadCafe - Software Developer Portal of Choice
>> >
>> > Get Started with SQLite and Visual Studio
>> >
>> > http://www.eggheadcafe.com/tutorials/aspnet/20f7912e-6fa7-40 eb-b31b-b6
>> > f46d4f2c6a/get-started-with-sqlite-a.aspx
>> >
>>
>>
>
>
Previous Topic:WINS question
Next Topic:Locked Out User
Goto Forum:
  


Current Time: Tue Jan 16 10:40:38 MST 2018

Total time taken to generate the page: 0.05015 seconds
.:: Contact :: Home ::Sitemap::.

Powered by: FUDforum 3.0.0RC2.
Copyright ©2001-2009 FUDforum Bulletin Board Software